|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-11-2014, 04:32 PM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 8
|
1997 Ezgo Dc Controller 1206sx wiring pics
I have a 1997 Ezgo electric cart one week after I bought the motor and controller burnt up I removed all wiring but didn't label could anyone point me in the right direction to wire back up properly. It has a 400 amp Ezgo 1206sx controller and a 4 post solenoid and a DCS resistor chip as well everything seems wired up but once I attempt to put the positive wire on the battery sparks. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-12-2014, 08:25 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
You may have the DCS Resistor/diode assemble on backwards. Remove it completely and then try to connect the battery pack cables.
Here is a schematic of a DCS |
05-12-2014, 08:23 PM | #3 |
Not Yet Wild
Join Date: May 2014
Posts: 8
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
Dumb question how do you determine the correct way to install the DCS resistor to the solenoid there's no arrow showing which way to put on the chip?
Thanks |
05-12-2014, 08:41 PM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
Resistors don't care. Diodes do.
|
05-12-2014, 09:36 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
There are 2 diodes on that board...... take it off ans see if the cart runs, If it does look at the diodes on the board, they have a white band on one end of them, both white ends are towards the same side of the board .... install this end of the board on the same post with the little red wire..... I hope this helps
|
05-14-2014, 09:06 PM | #6 |
Not Yet Wild
Join Date: May 2014
Posts: 8
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
You don't happen to know the proper wiring for the wiring on the solenoid as well do you that seems to be the other problem I'm facing too.
Thanks |
05-14-2014, 09:20 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
If read ALL of this you will know how to wire any solenoid on any golf cart, basically.
|
05-14-2014, 09:35 PM | #8 |
Not Yet Wild
Join Date: May 2014
Posts: 8
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
Thanks I'll keep you posted if I have any other problems or questions!!
You Rock Man!!!!! |
05-14-2014, 11:17 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
No problem, we're all buggie nuts from the same tree
|
05-15-2014, 12:57 PM | #10 |
Not Yet Wild
Join Date: May 2014
Posts: 8
|
Re: 1997 Ezgo Dc Controller 1206sx wiring pics
Well I have wired the golf cart to both diagrams and the golf cart does nothing at all?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB Curtis 1206SX-005 Controller | Golf Carts and Parts | |||
1997 XI 500 EZGO wiring | Electric EZGO | |||
EZGO 1206sx Controller Replacement info | Electric EZGO | |||
Need A Dcs 1206sx Controller | Electric EZGO |