|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-12-2014, 10:13 AM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 36
|
83 ezgo resistor cart wiring diagram
I have been running the cart for 3+ years . Just replacing resistors and some cables and was just double checking everything . I'm getting thrown off because my emp motor leads are s1, s2 , and l1, l2. The closest diagram shows A1 going to the resistor then the wiper board . Witch is not how mine is? I'm just making sure it is how it should be.
Any diagrams or ideas http://www.buggiesgonewild.com/elect...-diagrams.html |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-12-2014, 10:15 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 83 ezgo resistor cart wiring diagram
There is more than one way to wire this but, to be safe contact EMP and ask for a diagram to wire your motor to the 83 Ezgo.
|
05-12-2014, 10:23 AM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 83 ezgo resistor cart wiring diagram
In the wiring diagram in the stickys/ the link you posted- A1 goes to the F/R switch, not the resistors then the wiper board, what diagram are you talking about ?
|
05-12-2014, 11:14 AM | #4 |
Not Yet Wild
Join Date: Jul 2010
Posts: 36
|
Re: 83 ezgo resistor cart wiring diagram
See attached
|
05-12-2014, 12:18 PM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 83 ezgo resistor cart wiring diagram
The difference between wiring diagrams and schematic diagrams strikes again.
A wiring diagram shows the physical layout of the wires and a schematic shows the electrical layout. Stud-4 on the wiper board, Stud-4 on the coils and Stud-A1 on the motor are electrically the same point, but appear to be connected in series on the wiring diagram. A1 on two of the three different schematics I have for a resistor cart are connected like the wiring diagram posted. (Like Scotty said, more than one way to wire it) Attached is one where A1 is connected to F/R switch alone. As mentioned, it would be best to get a wiring diagram from EMP showing exactly how their motor is to be wired in your cart. |
05-12-2014, 01:25 PM | #6 |
Not Yet Wild
Join Date: Jul 2010
Posts: 36
|
Re: 83 ezgo resistor cart wiring diagram
As I work in mccs every day your right its not complicated. When you have a drawing that is correct there is no reason to do it another way just because you can. I'm just wondering why they have a few different drawings for the resistor carts .
|
05-12-2014, 01:29 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 83 ezgo resistor cart wiring diagram
Likely because there were many manufactures, each with their own engineers. Much like the similarities and yet differences in automobile wiring of the same vintage.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring diagram for a 84 ezgo gas cart | Gas EZGO | |||
Wiring Diagram for a 1987 EZgo gas cart | Gas EZGO | |||
wiring diagram for ezgo txt cart | Electric EZGO | |||
EZGO Resistor cart wiring 1983 Fairway Villager | Electric EZGO | |||
EZGO Resistor cart wiring | Electric EZGO |