|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-12-2020, 09:31 PM | #361 |
A Gal with a Cart!
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
|
Re: G2/G9 Twins I've Inherited - Non-running
M10 bolts in 4 different ways.
Surely one will fit. I'd love to have a Bolt sorter (a la CoinStar). I also need a PVC Connector sorter. A Drill bit/screwdriver tip sorter. And, of course, a yarn skein sorter. Tomorrow is Friday and I'm headed back to the Golf Cart to see if my bolts fit. Today was the plumbing day. We run the house on rainwater and I wanted to connect the third tank into the system. I ALMOST got it. Only had 1 leaky 2 inch PVC connector when I did the stress test. Took me 2 1/2 hours and one trip to town for glue. Someone needs to create a PVC glue that doesn't set up before I use the entire can. If I get the small can, I run out and have to go back to the store (16 miles round trip). If I get the big can, it turns to gel, and I have to go back to the store. I went with the 'Rain or Shine' medium size container today. I'll let you know next spring if it gels up over the winter. My hubby sat and watched me work on the plumbing. He was good... never asked about the Golf Cart until I was down to the last connector. JW |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-12-2020, 10:53 PM | #362 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: G2/G9 Twins I've Inherited - Non-running
Hello JW. Been a while.
I have the same issues with the PVC glue/primer. Seems like every time I need it the stuff has gone bad. |
11-15-2020, 08:54 PM | #363 |
A Gal with a Cart!
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
|
Re: G2/G9 Twins I've Inherited - Non-running
And .... drum rolllllllllllll......
Plumbing. 5 connections were fine. 1 connection leaks UGH M10 Bolt: exactly none of them fit. Apparently, I need new glasses. I only bought course pitch and I'm thinking this is a machine pitch. BLEH But on a good note ... that means a new trip to the Co-op in town (only 16 miles round-trip). And weather has been wonderful (albeit a little blustery). 70's. Bless you and thank you lord. JW |
Tags |
g2/g9 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inherited a beat up EZ Go - Where do I start? | Electric EZGO | |||
Inherited pds problem | Electric EZGO | |||
I inherited a Club Car! | Electric Club Car | |||
Inherited Dead Club Car | Electric Club Car |