|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-27-2021, 10:33 AM | #1 |
Not Yet Wild
Join Date: Aug 2020
Location: Grant Mi
Posts: 15
|
g1 trouble with exceleration
hi everyone i have a G1 that i'm working on i've changed the bearings and seals on and it seemed to run good last fall but this spring i'm having some trouble with is accelerating after i stop and idle then it just dose not want to take off i've switch to a different muffler with not much change dose start better any help would be greatly appreciated thank you
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2021, 10:49 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g1 trouble with exceleration
Those carts weren't really meant to sit and idle so the carb can get a little funny. I'd suspect carb or fuel quality issues first. If it's a stock Mikuni carb, keep it and clean it in a sonic cleaner. Get new gaskets and a new float and needle. If the carb has play in the throttle shaft it needs to be reworked or replaced. I do not recommend the cheap china carbs. Try to find a good used or new Mikuni. You can convert the carb to a motorcycle style with some effort.
|
03-27-2021, 12:23 PM | #3 |
Not Yet Wild
Join Date: Aug 2020
Location: Grant Mi
Posts: 15
|
Re: g1 trouble with exceleration
thanks for the reply i'll look at the carb also had the the fuel line at the fuel pump the brass 90 come out of the pump while riding the other day what will keep that from happing again?
|
03-27-2021, 02:25 PM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g1 trouble with exceleration
|
03-27-2021, 03:25 PM | #5 |
Not Yet Wild
Join Date: Aug 2020
Location: Grant Mi
Posts: 15
|
Re: g1 trouble with exceleration
the brass 90 fell out of the pump
|
03-29-2021, 10:02 PM | #6 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g1 trouble with exceleration
Might be time for a new pump. I've never seen those come apart.
On my G1 I just replaced the very old and nasty metal mikuni stock unit with a plastic Briggs and Stratton pump, worked great. Very inexpensive, under $25. It won't bolt in place of the old one exactly the same. If I remember correctly I just used one mounting ear of the new pump and used one stock bolt. The rubber lines mated up fine. |
03-31-2021, 08:30 AM | #7 |
Not Yet Wild
Join Date: Aug 2020
Location: Grant Mi
Posts: 15
|
Re: g1 trouble with exceleration
thats what i was thinking i did'nt know if anyone else had a way to fix it the pump works great other then the 90 falling out
|
04-03-2021, 09:47 AM | #8 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g1 trouble with exceleration
Quote:
I don't know if that fitting is pressed on or what. It's not supposed to come apart I can tell you that for sure. Does it have threads or anything? Does your pump look like this? |
|
04-03-2021, 01:27 PM | #9 |
Not Yet Wild
Join Date: Aug 2020
Location: Grant Mi
Posts: 15
|
Re: g1 trouble with exceleration
yes it looks like that and no it where are no threads on the 90
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV trouble | Electric EZGO | |||
DCS Trouble | Electric EZGO | |||
98 Trouble | Gas EZGO | |||
Still Having Trouble | Electric EZGO | |||
ez go trouble | Electric EZGO |