2005-2006 Club Car Wiring Harness

[freemurray]

Anyone have any 05-06 Club Car Precedent Wiring harnesses? I can use either one of these part #'s Cart PR0638-680758 Club Car Precedent GAS

103536501 -uses the Triac Pedal

102586201 -uses the GCOR Pedal

[crash12888]

Did you check the stickies for the appropriate wiring diagram?

[freemurray]

I have the diagrams. What I need is a new harness. I can use either one because I have both foot pedals (complete with GCOR on one and Triac on the other) . I really dont want to try n fix the harness I have its a mess

[Fairtax4me]

Good gravy somebody went coked up squirrel attack on that one didn't they.
Kinda hard to find used parts for most cars these days unless its suspension or body parts take-offs.
Ask David Hicks if he can order one. Revolution Golf Cars. Site sponsor, Club Car extraordinaire.

[freemurray]

David doesn't have it. CC is out of stock until Feb of next year. Yea this cart came to me like this. I have a new motor to go in it. I really dont want to attempt to fix these wires

[Fairtax4me]

Well… In that case, maybe try the classified section here.
Or call every cart shop within 150 miles of you and see if any have a spare parts cart they’ll let you snatch the harness out of?
Or wait til Feb.

[CP241]

I’d bet it’s not as bad as it looks. I’ve been through much much worse than that…

If it was gonna take until Feb for a new one, I’d just remove it from the cart and repair it on the bench. Then put it back in. Continuity tests are quick and easy once it’s removed from the cart. You could fix that and have it looking like new in an afternoon pretty easily

[crash12888]

Originally Posted by freemurray

I have the diagrams. What I need is a new harness. I can use either one because I have both foot pedals (complete with GCOR on one and Triac on the other) . I really dont want to try n fix the harness I have its a mess

Oops, my bad, miss read what was said.....

[freemurray]

Originally Posted by CP241

I’d bet it’s not as bad as it looks. I’ve been through much much worse than that…

If it was gonna take until Feb for a new one, I’d just remove it from the cart and repair it on the bench. Then put it back in. Continuity tests are quick and easy once it’s removed from the cart. You could fix that and have it looking like new in an afternoon pretty easily

Its pretty bad. I have repaired many many wires but this one is really bad. The plug ends have been cut off as well. Not sure why but this is the way I got it. I have a new motor for it and a new painted body.

I found a guy today with a gas harness but its for the fuel injected models and not sure if it works with GCOR or Triac pedal or even at all.

I will be more cautious next time in buying 05-06 models. The older DS models are much easier to get the parts and cheaper too

[Fairtax4me]

Good candidate to convert to electric if you can get an axle for it.