|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-27-2009, 08:03 PM | #21 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Adjust both valves at TDC-and is there any fuel in the bowl when he loosens the bolt at the bottom of the carb?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2009, 08:31 PM | #22 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 will not run.
|
12-27-2009, 09:20 PM | #23 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Is the idle adjustment screw turned out one and a half turns? Man, it's got ta run!
Check the grounds, make sure they are all good (maybe spark is intermittent)? |
12-27-2009, 09:22 PM | #24 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Someone else on here had a loose starter belt. Check along those lines
|
12-27-2009, 09:23 PM | #25 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 will not run.
|
12-27-2009, 09:23 PM | #26 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 will not run.
|
12-27-2009, 10:01 PM | #27 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Turn it over for 30/40 secs. then pull the plug, if it is not wet, then it is not getting fuel.
Then it has to be ether a carb problem or the valves aren't working. Can you feel compression by hand or tell by it when you turn it over with the starter? |
12-27-2009, 10:09 PM | #28 | |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 will not run.
Quote:
The compression gauge read 160 lbs. With the valve cover off the valves are working fine. |
|
12-27-2009, 10:12 PM | #29 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Did I read somewhere that you dumped the old gas and put in fresh? Maybe you haven't started it since the cold wheather
|
12-27-2009, 10:16 PM | #30 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 will not run.
Smallblock, please come in here! You know everything! Crash! is another, Spriddle , Sho ,this guy needs the smart guys!
|