07-04-2010, 09:12 PM | #1 |
Not Yet Wild
Join Date: May 2010
Location: Alabama
Posts: 43
|
clutch question
I am putting a 16 hp honda clone engine in a 95 CC and was wondering if any can tell me if a 97 CC drive clutch will work? I have been trying to buy a comet clutch or something equivalent. I cannot seem to come up with anything so i am going to have to go another direction.My driven clutch is ok but i have to have a drive clutch. Will somebody please let me know?
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-04-2010, 09:19 PM | #2 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: clutch question
It would require 2 things, A tapered clutch adapter and opening it up and changing the position of the button springs. Then yes it would,
|
07-05-2010, 05:02 AM | #3 |
Not Yet Wild
Join Date: May 2010
Location: Alabama
Posts: 43
|
Re: clutch question
Thanks, would i have to cut the shaft on the motor and is changing the buttons out very hard?
|
07-05-2010, 09:08 AM | #4 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: clutch question
Possibly, and no. Changing buttons is easy
|
|
|
Similar Threads | ||||
Thread | Forum | |||
clutch question! | Gas EZGO | |||
g14 clutch question | Gas Yamaha | |||
Please help me with a clutch question? | Gas EZGO | |||
clutch question | Gas EZGO | |||
Clutch Question | Gas EZGO |