rebuilding a 295 with .50 over - good/bad

kevdude59 · 08-11-2010, 08:30 AM

I am working on my first cart wich was purchased with a non running engine. I have torn everything apart and am looking to order engine parts. It is a 1995 with a 295.

The block has already been bored to .25 over and the cylinders are obviously larger now. I can make a .50 piston work with the block, but an wondering if there is any issues with using a .50 over setup (ie, runs hot, etc.).

ez go go · 08-11-2010, 08:42 PM

My 350 is .50 over and I have'nt had the first problem. Build it, run it!

08-11-2010, 08:30 AM	#1
kevdude59 Not Yet Wild Join Date: Apr 2010 Posts: 13	rebuilding a 295 with .50 over - good/bad I am working on my first cart wich was purchased with a non running engine. I have torn everything apart and am looking to order engine parts. It is a 1995 with a 295. The block has already been bored to .25 over and the cylinders are obviously larger now. I can make a .50 piston work with the block, but an wondering if there is any issues with using a .50 over setup (ie, runs hot, etc.).
kevdude59 Not Yet Wild Join Date: Apr 2010 Posts: 13

08-11-2010, 08:42 PM	#2
ez go go Doin' the Wild Thang Join Date: Mar 2010 Location: Greenville, AL Posts: 1,063	Re: rebuilding a 295 with .50 over - good/bad My 350 is .50 over and I have'nt had the first problem. Build it, run it!

Similar Threads
Thread	Forum
Replaced OBC, Charger is good, good cables, Specific gravity is off the charts, but..	Electric Club Car
Rebuilding my 350	Gas EZGO
Rebuilding Controllers	Electric EZGO
rebuilding my motor	Gas Yamaha
rebuilding par car	Gas Columbia ParCar

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum