|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-25-2014, 12:32 PM | #1 |
Getting Wild
Join Date: Jul 2011
Location: Central Texas
Posts: 104
|
Loose bolt on main clutch G29
Hello, I bought a stock 2012 G29 over the weekend. I was driving it the other day and noticed that it had a noise like something was rubbing on the back of the cart. I pulled into the garage and looked under the seat and noticed the bolt on the main clutch had backed out. I was able to tighten it with my hand and then I put a wrench on it and tightened it until the motor turned over. My question is how tight does it need to be? Tighten as hard as I can or just a bit over snug. I don't want to over or under tighten. Any ideas on how it got loose?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-26-2014, 08:57 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Loose bolt on main clutch G29
I use an impact to tighten the bolt, no need to go crazy with it.
|
08-26-2014, 09:43 PM | #3 |
Getting Wild
Join Date: Jul 2011
Location: Central Texas
Posts: 104
|
Re: Loose bolt on main clutch G29
Thank you kind gentleman.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
clutch main | Gas Yamaha | |||
454 - 4 Bolt Main Bare Block with extra Parts - Tampa, FL | Autos/Side x Sides/ATVs/4x4's | |||
squeeky, back and forth play in both rear wheels, loose washer behind wheel bolt.? | Electric EZGO | |||
bolt on motor loose | Electric EZGO | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car |