11-14-2020, 03:41 PM | #1 |
Not Yet Wild
Join Date: Oct 2020
Posts: 42
|
36v to 48v ezgo dcs info needed
So i decide to upgrade to 48 volts.
My Navitas controller is 36/48 so issues there. Motor is an mot-b2 36/48 . I have 6 8 volt batts and a charger on the way. My main question is about the solenoid and charger plugs. 1 can run the oem type d plug on the 48 volt charger or will i need to change the carts charger receptacle to the 3 plug style. 2 will the 36 volt solenoid survive for awhile or will i need to upgrade right away to 48v solenoid. Any other info will be appreciated |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-14-2020, 03:46 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: 36v to 48v ezgo dcs info needed
Charger plug will be fine. It depends on the solenoid. Did you upgrade it when you put the Navitas in?
|
11-14-2020, 03:47 PM | #3 |
Not Yet Wild
Join Date: Oct 2020
Posts: 42
|
Re: 36v to 48v ezgo dcs info needed
|
11-14-2020, 03:53 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: 36v to 48v ezgo dcs info needed
Which one did you use? Some will support 48v
|
11-14-2020, 10:21 PM | #5 |
Not Yet Wild
Join Date: Oct 2020
Posts: 42
|
Re: 36v to 48v ezgo dcs info needed
This is a 36 volt 400a solenoid nothing soecial
|
11-14-2020, 10:28 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: 36v to 48v ezgo dcs info needed
If it is an mzj it will work on both 36 and 48
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo dcs 1997 f/r switch info needed | Electric EZGO | |||
Questions and info needed in this model EZGO | Electric EZGO | |||
ezgo replacement motor info needed | Electric EZGO | |||
ezgo charger~~ info needed | Electric EZGO | |||
EZGO 6 person info needed | Electric EZGO |