Help finding a belt

utmgrad · 01-11-2021, 01:15 PM

It's been a while since I've posted anything here but y'all have always been helpful. A friend of mine bought a couple of non running carryalls and asked if I could get one running for him. Got one bone stock one running. He liked it so much he wanted the other going.

Engine was blown so we bought a predator engine planning on running stock clutches. Just trying to get it back running as close to stock as possible and without breaking the bank. I have it installed and running but can't find a belt that fits properly. Bought one that was a hair to wide and wanted to run on the top of the driven clutch. Bought another that was a hair narrow and a hair to long. This one won't run fully up the driven causing the cart to be slow. Anybody have a good reference for replacement belts? All help is appreciated.

raydhd · 01-11-2021, 02:28 PM

In the CVT belt sticky there is a Dayco belt listing. I did belt custom fitting on my VC 460 powered G 14

utmgrad · 01-11-2021, 03:17 PM

Dayco has a search by dimension option, I tried that but nothing 1" wide.
When you say you did custom fitting, did you have one made?
Thanks

raydhd · 01-11-2021, 04:48 PM

No I searched the Dayco chart until I found one that matched the sizing I calculated. With 1" wide belts there is not a lot of selection. Probably that along with being minimal in power handling most people upgrade to the wider clutches.

01-11-2021, 01:15 PM	#1
utmgrad Gone Wild Join Date: Apr 2014 Location: Tennessee Posts: 178	Help finding a belt It's been a while since I've posted anything here but y'all have always been helpful. A friend of mine bought a couple of non running carryalls and asked if I could get one running for him. Got one bone stock one running. He liked it so much he wanted the other going. Engine was blown so we bought a predator engine planning on running stock clutches. Just trying to get it back running as close to stock as possible and without breaking the bank. I have it installed and running but can't find a belt that fits properly. Bought one that was a hair to wide and wanted to run on the top of the driven clutch. Bought another that was a hair narrow and a hair to long. This one won't run fully up the driven causing the cart to be slow. Anybody have a good reference for replacement belts? All help is appreciated.

01-11-2021, 02:28 PM	#2
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,644	Re: Help finding a belt In the CVT belt sticky there is a Dayco belt listing. I did belt custom fitting on my VC 460 powered G 14

01-11-2021, 03:17 PM	#3
utmgrad Gone Wild Join Date: Apr 2014 Location: Tennessee Posts: 178	Re: Help finding a belt Dayco has a search by dimension option, I tried that but nothing 1" wide. When you say you did custom fitting, did you have one made? Thanks

01-11-2021, 04:48 PM	#4
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,644	Re: Help finding a belt No I searched the Dayco chart until I found one that matched the sizing I calculated. With 1" wide belts there is not a lot of selection. Probably that along with being minimal in power handling most people upgrade to the wider clutches.

Similar Threads
Thread	Forum
1997 ezgo belt size/smaller belt for more torque	Gas EZGO
Finding < 45" Belt Size options	Big Block Talk!
replacing alternator/starter belt with shorter belt	Gas Club Car
Help finding a belt?	Lifted Golf Carts
'92 carryall with new engine, belt slips even with new belt and motor set far forward	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum