|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2010, 04:23 PM | #11 |
Gone Wild
Join Date: Dec 2009
Location: Waihee, Maui, Hawaii
Posts: 262
|
Re: 1987 Marathon
Check your wiring going from the wiper board to the coils. you may mixed up a few. Make sure the wire ends are not touching each other. If the coil is broken you will get a dead zone while pressing the pedal. The jerking toward the end as you slow down is just the first contact engaging and disengaging. This is normal and you will learn to just let the cart coast and use the brake rather than trying to go slow. If you check the oil in the rear end you might be low. I added a quart to mine and it smoothed out the jerking and clanking a little bit on my cart.
joe |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2010, 09:04 PM | #12 |
Gone Wild
Join Date: Nov 2008
Location: MI, West Coast
Posts: 235
|
Re: 1987 Marathon
[QUOTE=mauistardog;413977] If you check the oil in the rear end you might be low. I added a quart to mine and it smoothed out the jerking and clanking a little bit on my cart.
The oil capacity is 8 - 10 oz. A quart added is waaay to much. |
06-12-2010, 04:39 PM | #13 |
Not Yet Wild
Join Date: Jun 2010
Posts: 20
|
Re: 1987 Marathon
i have the same thing that 5th post on the acc wiper switch i thought it went to the solenoid but when i put it on there i get some arcing
|
06-12-2010, 09:38 PM | #14 |
Gone Wild
Join Date: Mar 2010
Location: Mountaindale, Oregon
Posts: 303
|
Re: 1987 Marathon
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1987 ez go marathon rear axle | Electric EZGO | |||
More Power Out Of My 1987 EZGO Marathon | Gas EZGO | |||
1987 Marathon Wiring | Members Rides | |||
1987 EZ GO Marathon | Gas EZGO | |||
1987 Marathon motor reassembly | Electric EZGO |