|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-22-2012, 09:16 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Abilene, Tx.
Posts: 62
|
Changed resistor board, cart jumpy
okay fella's i got another problem, I changed out a resistor board on an electric ez go today and before i changed it, i several other issues, which i finally figured out. Now, when you push the pedal, the cart wants to haul butt, and then stops abruptly..is it possible that i could have put a resistor wire on backwards that would cause this? otherwise what do you think i could be dealing with?
any help would be greatly appreciated |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-22-2012, 09:34 PM
|
#2 |
|
Gone Wild
Join Date: Oct 2011
Location: Southeast Ohio -- "The Toenails of the Foothills of Appalachia"
Posts: 232
|
Re: Changed resistor board, cart jumpy
Check the wiring from the accelerator/wiper board to the resistor. Sounds like you got the wires out of order. Photos of the wiper board and the wiring from it to the resistor would help in troubleshooting the problem.
RLW |
|
|
|
|
09-26-2012, 12:27 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Abilene, Tx.
Posts: 62
|
Re: Changed resistor board, cart jumpy
RLW,
Did that, i had one and three wire on wrong terminal, swapped it and it fixed it. Thanks for the help!! |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Resistor wiper contact board | Electric EZGO | |||
| Need info on Logisystems board resistor size PLEASE | Electric EZGO | |||
| 5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO | |||
| Resistor board assembly problems | Electric EZGO | |||
| resistor board material | Electric EZGO | |||
Linear Mode
