Need help for Melex

[ctstradley]

Ok, I have a melex electric 212 serial number 153126 and it has what appears to be a relay mounted right next to the solonid with 2 wires comming off the spade terminals one going to the key switch and one going to what looks like the speed controil (under the solonid) this relay?is bad and I need to locate another or advice on how to convert? Thanks ctstradley@earthlink.net

[tmfrizzell@zona.net]

Does your Melex have the resistor coil(s) in the back or on the speed control. If you can tell me which one I will send a copy of the entire wiring diagram for the model. I believe with that model number it will be on the back, am I right?

[ctstradley]

coils on the back is correct

[ctstradley]

yes sir the coils are on the back

[tmfrizzell@zona.net]

Here is the diagram

[tmfrizzell@zona.net]

Here is the proper one

[ctstradley]

Thanks for the wiring diagram, If you look at the location of the solonid the side where 2 wires hook up. There is what appears to be a "relay" on my cart located to the left of the solonid where 2 wires hook up. I believe my cart is a 1978? the only serial number I can find is 153216 and model 212. You cannot hook these 2 wires together, I will try and send you a picture of this "relay"

[tmfrizzell@zona.net]

I just emailed you all the info re: this relay. It is your reverse warning buzzer. I also sent the site to get the replacement part. Vintage always gets things our within a few days. Let me know if it works. Good carting.