1 inch to 1.5 inch pipe expander

Clayboy · 12-29-2006, 09:27 PM

I need some kind of fitting to bring a 1 inch exhaust to a 1.5 inch tube. I know one is out there somewhere, I just ain't found it yet.

TheNewGuy · 12-29-2006, 10:42 PM

You might find something at http://www.jcwhitney.com

fastjim11 · 12-29-2006, 10:57 PM

I may be also called a swaging tool. I think i've seen them at Harbor freight also. I think they are mostly for thin wall stuf.

WALKNTALL · 12-31-2006, 03:48 PM

Thats a big expansion.

I always take my pieces to a muffler shop and let them do it. I've made alot of adapters like that for mufflers etc.

Frank

12-29-2006, 09:27 PM	#1
Clayboy Gone Wild Join Date: Dec 2006 Posts: 489	1 inch to 1.5 inch pipe expander I need some kind of fitting to bring a 1 inch exhaust to a 1.5 inch tube. I know one is out there somewhere, I just ain't found it yet.
Clayboy Gone Wild Join Date: Dec 2006 Posts: 489

12-29-2006, 10:42 PM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 17,835	You might find something at http://www.jcwhitney.com
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

12-29-2006, 10:57 PM	#3
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381	I may be also called a swaging tool. I think i've seen them at Harbor freight also. I think they are mostly for thin wall stuf.
fastjim11 Gone Wild Join Date: Dec 2006 Posts: 381

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-31-2006, 03:48 PM	#4
WALKNTALL Getting Wild Join Date: Dec 2006 Location: Dallas / Fort Worth Posts: 88	Thats a big expansion. I always take my pieces to a muffler shop and let them do it. I've made alot of adapters like that for mufflers etc. Frank