10-03-2010, 01:52 AM | #1 |
Not Yet Wild
Join Date: Oct 2010
Posts: 2
|
Wiring Schematic for Melex 667 needed
I got a Melex 667 added to my fleet at work, and would greatly appreciate if someone would have a wiring schematic for it. While we are looking, perhaps there is a service manual also available. Attached is the serial plate.
Many many thanks for your help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-08-2020, 02:44 PM | #2 |
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
Re: Wiring Schematic for Melex 667 needed
i KNow old post, but instead of making new, bumping this.
anyone know of a good manual for this 667? picked up one cheap from a ranch here in az, and packrats ate every small wire under the seat. having a hard time finding a manual on the web. maybe someone with some experience could give me some tips? theres wiring coming out of the potbox where rthe accelerator is hooked up. does this go to the controller or the solenoid. and the limit switches on the back of of the forward rear where do those go? i know all the main big guage wires are hooked up right, its just the smaller wires im having a hard time matching up. thank you |
07-14-2020, 02:16 PM | #3 |
Not Yet Wild
Join Date: Jun 2020
Location: Vincennes, IN
Posts: 10
|
Re: Wiring Schematic for Melex 667 needed
If you're willing to buy it, you can get it here:
https://www.vintagegolfcartparts.com/Item/ME_PrtsMan666 I was in the same boat as you with my 252, but after studying it long enough and asking enough questions on here (in the EZGO forum), the smaller wires started making sense. |
07-22-2020, 11:25 AM | #4 |
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
Re: Wiring Schematic for Melex 667 needed
Thanks for the link. ill try and get that manual for this specific model. i found a melex 512e wiring diagram looked to be what i needed i had it running on jack stands last saturday in forward and reverse for 5 mins, got a forklift to lift it up take jackstands out. put it on ground and didnt move anywhere. jacked it back up and now cant get the wheels to move. mmultimetered every wire cant find the break, sure is frustrating. wish we didnt buy 8 new 6v batteries for it, would have been up and running with a gas motor conversionn already lol
thanks |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
87' G2 wiring schematic | Gas Yamaha | |||
Wiring schematic EZ-GO PCX 956 needed | Electric EZGO | |||
93 DS Light Kit wiring schematic needed | Gas Club Car | |||
EZ-GO 1997 schematic needed | Electric EZGO | |||
Melex Model 666 wiring schematic needed | Melex |