05-05-2011, 03:15 PM | #1 |
Not Yet Wild
Join Date: Mar 2011
Posts: 22
|
341 bore questions??
I am rebuilding my 91 CC with the 341cc and using a .025 piston. What is the piston to cylinder wall clearance suppose to be? The machininst wants to know.
BUBBA |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-06-2011, 12:59 PM | #2 |
Not Yet Wild
Join Date: Jul 2009
Location: Northwest Washington
Posts: 67
|
Re: 341 bore questions??
piston to cylinder clearance ..... .010 in.
bore taper ( top to bottom) ...... .006 in. bore out of round ...... .001 in. ring to groove clearance (all) ...... .006 in. piston ring gap (all) ...... .039 in. Quote from the manual. These specs are wear limitations and not design specs. These parts should be replaced when worn to these specs. |
|
|
Similar Threads | ||||
Thread | Forum | |||
89 clutch bore | Gas EZGO | |||
G14 Cylinder Bore Damaged | Gas Yamaha | |||
G1 bore | Gas Yamaha | |||
Rhino or big bore cart? | Big Block Talk! | |||
standard bore 1990 E-Z-Go | Gas EZGO |