03-13-2008, 07:15 PM | #1 |
Not Yet Wild
Join Date: Mar 2008
Location: Houston Texas
Posts: 13
|
Z Lifts?
I bought a cart with a Z Lift installed. I thought it was kinda wierd to cut the frame. I can weld it back it needed but please tell me what's bad about them or what I may expect in the future.... Thanks for any help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-13-2008, 07:38 PM | #2 |
**** guzzler
Join Date: Dec 2006
Location: S. E. Mich.
Posts: 730
|
Re: Z Lifts?
I wouldn,t be concerned about the lift at all, a lot of people run them and run them hard. I have yet to hear of one failing. Run it and enjoy.
|
03-13-2008, 08:20 PM | #3 |
Super Moderator
Join Date: Mar 2007
Location: Pluto
Posts: 20,472
|
Re: Z Lifts?
I have one. I have "run the $hit out of it. Offroad, the dunes, you name it. It's done fine. I guess given a choice though, I'd rather not have the frame cut.... just on principal..but so far it's done everything I've asked it to and it's been a year of hard use.
Boo |
03-13-2008, 08:35 PM | #4 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Z Lifts?
Old school, but still the best way to lift a CC in my book...
|
|
|
03-13-2008, 09:56 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Z Lifts?
I have one on a 2000 carryall I purchased...Problem is it was not enough lift...for the 23s that are on it.
|
03-13-2008, 10:06 PM | #6 |
**** guzzler
Join Date: Dec 2006
Location: S. E. Mich.
Posts: 730
|
Re: Z Lifts?
Add a spindle lift, that should get you there.
|
03-13-2008, 10:07 PM | #7 |
Not Yet Wild
Join Date: Mar 2008
Location: Houston Texas
Posts: 13
|
Re: Z Lifts?
Very glad to hear the positive responses.....I was a little concerned. Thanks alot for all the input. I was supposed to pick it up today but for some reason he is having a problem programming it to the 4th speed? Only getting 16mph he says. I probably wouldn't know the difference. :)
|
03-13-2008, 10:09 PM | #8 |
Not Yet Wild
Join Date: Mar 2008
Location: Houston Texas
Posts: 13
|
Re: Z Lifts?
|
03-13-2008, 10:13 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Z Lifts?
A friend of mine said the same and showed me some pics of the finished cart. It looked good with a jakes 3" spindle lift added. But paying for another kit wasn't in me so I fabbed another 2" - What a pia! But works good!
|
03-13-2008, 11:04 PM | #10 |
Super Moderator
Join Date: Mar 2007
Location: Pluto
Posts: 20,472
|
Re: Z Lifts?
You'll hear alot of negatives about that lift, but truth be told... it's been tough as nails for me. I guess that says something for it.
Boo |