|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-28-2007, 10:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2006
Location: So. Ohio
Posts: 24
|
12 volts with key ON?
Hello everyone!!!
I'm putting the stock motor back in my G2. I want to use my electric fuel pump. Where can I pick up 12 volts with the key on & not overload anything or blow any fuses? Have gone back to all stock wiring harness. Thanks!!! Mike Last edited by BuggyBrain; 07-28-2007 at 10:27 PM.. Reason: typo in title (!2 volts vs 12 volts) |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2007, 06:38 PM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: 12 volts with key ON?
You should be able to pick up 12v at the switch on the gas pedal.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
07-29-2007, 07:20 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2006
Location: So. Ohio
Posts: 24
|
Re: 12 volts with key ON?
That's a good idea. That won't overload anything or blow any fuses that way? I'll ground the pump directly to the battery. Thanks.
Mike |
|
|
|
|
07-29-2007, 07:21 PM
|
#4 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: 12 volts with key ON?
Doing that way shouldn't hurt anything. You are welcome!!
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
|
||||||
|
|
Linear Mode
