|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-29-2020, 10:53 AM | #3511 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Yamaha G9 Club - Everything G9!
That's looking great! much better than new
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-31-2020, 01:18 PM | #3512 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Yamaha G9 Club - Everything G9!
Love the detail and the shifter Tom
|
04-06-2020, 12:29 PM | #3513 |
Getting Wild
Join Date: Mar 2020
Location: York, South Carolina
Posts: 83
|
Re: Yamaha G9 Club - Everything G9!
Lots of great information here!! Looking to get my 93 G9 brought back to life!
|
04-07-2020, 02:59 PM | #3514 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Yamaha G9 Club - Everything G9!
You came to the right place!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
04-08-2020, 06:11 PM | #3515 |
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: Yamaha G9 Club - Everything G9!
|
05-29-2020, 01:27 PM | #3516 |
Not Yet Wild
Join Date: May 2018
Location: NW INDIANA
Posts: 28
|
Re: Yamaha G9 Club - Everything G9!
looking good on the cart what kind of floor shift is it looking to do same to my cart
|
09-01-2020, 08:20 PM | #3517 |
Not Yet Wild
Join Date: Jul 2020
Posts: 22
|
Re: Yamaha G9 Club - Everything G9!
4D1EC4C2-B1D9-4A3B-A0C3-701102A7A995.jpg
My G9 just before it spun a bearing during 4th of July parade. After much trials n tribulations I got it running with a used crank and new bearings, seals, gaskets and rings etc it’s running again but very hot! I added exactly one quart of oil like I’ve read but after 5 minutes of run time it was hot and only showing 1/2 full on the stick. Shrouds are ckean, carb was set to specs and rechecked valves after it cooled down. Any ideas? Have no idea how to turn picture right side up, sorry |
09-03-2020, 08:55 AM | #3518 |
Not Yet Wild
Join Date: Jul 2020
Posts: 22
|
Re: Yamaha G9 Club - Everything G9!
Well on a hunch I took muffler off and it’s running cool as it should in case anyone else had similar issues
|
07-01-2021, 10:20 AM | #3519 |
Not Yet Wild
Join Date: May 2018
Location: NW INDIANA
Posts: 28
|
Re: Yamaha G9 Club - Everything G9!
I just wanted to say thanks to all the people who added to the g9 club page i have stalked mostly when working on my g9 that now has a vegas carts 625 in it. I enjoyed all the helpfull and knowledgeable advise given. Also was great to hear all the stories from members and hope this page helps others. Hope all are doing well
|
07-03-2021, 10:08 PM | #3520 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Yamaha G9 Club - Everything G9!
Hope you enjoy the G2/G9. I just swapped out the body on an old cart that I built a long time ago. The frame was rotted real bad from the battery. Now she has a little more power under the seat. It a G2/G9 combo with the body being G9 and the frame being G2. I had some brand new G2 rubber kick plates for a G2 so I used them also. New 18hp Briggs with two barrel carb, rev kit, big cam and other things. Almost done just needing a couple more things to come in.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamha g-16 with loud clicking sound | Gas Yamaha |