01-10-2010, 08:58 PM | #1 |
Not Yet Wild
Join Date: Nov 2009
Location: cumming,ga
Posts: 39
|
does this fe350 sound ok?
I was wanting to know if my engine sounds ok.I am new here.It does not sound good to me it sounds that if it is knocking.Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-10-2010, 09:09 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: does this fe350 sound ok?
Dang Club Cars Seems like they all sound like that to one degree or another
|
01-10-2010, 09:16 PM | #3 |
Not Yet Wild
Join Date: Nov 2009
Location: cumming,ga
Posts: 39
|
Re: does this fe350 sound ok?
Thanks that is what I had hoped for.I think that I need to send my cluch to get it machined to get some of my lost torque back,and add the new spring.
|
01-10-2010, 09:45 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: does this fe350 sound ok?
TOM at CPP can take care of you
|
01-11-2010, 06:19 AM | #5 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,934
|
Re: does this fe350 sound ok?
Sounds O.K. to me!
It really didn't sound any different then my 07 FE350! |
01-11-2010, 08:09 AM | #6 |
Not Yet Wild
Join Date: Nov 2009
Location: cumming,ga
Posts: 39
|
Re: does this fe350 sound ok?
Thanks for the replies.Lockman1 it sounds the same as yours.Thanks Scott
|
01-15-2010, 10:52 PM | #7 |
Gone Wild
Join Date: Feb 2009
Location: PA
Posts: 173
|
Re: does this fe350 sound ok?
that sounds like my 02 fe350 as well. i believe that is just how they sound..
|
08-15-2018, 08:17 PM | #8 |
Not Yet Wild
Join Date: Aug 2018
Posts: 11
|
Re: does this fe350 sound ok?
Scott10d, just listened to your engine noise. Mine sounds the same way and was diagnosed as coming from the counter weight. I have completely disassembled my engine to remove the counter weight assembly for examination. I see no excessive wear on the sleeve, weight bores, arm bores. All seemed to be tight enough with no excessive play. I also disassembled the oil pump. It looked good. I know what a rod knock sounds like and mine is not a rod knock. Neither is the noise coming from lash adjusters because they are hydraulic and have no adjustment provisions. My engine started the noise when I dis armed the faulty ACR, but I see no correlation between that and the engine noise I'm hearing. I do know my engine noise certainly is not normal....and I do not know where it's coming from. I'm considering reassembling the engine w/o the counter weight and see what happens. Thanks
|
08-15-2018, 09:01 PM | #9 |
Getting Wild
Join Date: Jan 2018
Posts: 88
|
Re: does this fe350 sound ok?
"...reassembling the engine w/o the counter weight and see what happens..."
Lot'sa vibration. Have you checked your drive clutch for flyweight rattle? |
08-16-2018, 08:27 AM | #10 |
Not Yet Wild
Join Date: Aug 2018
Posts: 11
|
Re: does this fe350 sound ok?
Removed the clutch except for the pulley for starting. No change in sound.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
FE350... Stalling Issue | Gas Club Car | |||
96 carryall fe350? | Gas Club Car | |||
What is valve adjustment Fe350 | Gas Club Car | |||
95 Club Car FE350 for COMET 780 | Big Block Talk! | |||
fe350 on a 07 CC Prec, oil filter ? | Gas Club Car |