01-07-2018, 07:44 PM | #11 | |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
Thanks I'm going to pull the motor and put crank seals only thing I haven't done..
Thanks to everyone who has helped it's appreciated. Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2018, 11:12 AM | #12 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: Robin EC25 3GP
Post some pictures as you go along if possible which could help others.
|
01-10-2018, 09:42 PM | #13 |
Gone Wild
Join Date: May 2011
Location: Michigan
Posts: 271
|
Re: Robin EC25 3GP
electric fuel pump
|
01-10-2018, 10:31 PM | #14 |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
I tried the electric fuel pump route and it didn't appear to making it in the motor so that really confused me, and the reeds open and close with compression I think , heck I really don't know think I'm just going to pull it out and take it to someone.
|
01-10-2018, 10:36 PM | #15 |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
If I tear it down I will but at this point I'm just super confused at why it's not getting fuel into the motor and using the electric pump i making sure the carb has fuel. It's just doesn't get the fuel into the cylinder for some reason, that's why I was asking if the rings are switched around will that cause issues.
Such a simple motor causing lots of grief.. |
01-10-2018, 11:01 PM | #16 |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
Is there timing on these motors? Robin EC25 3pg, I mean if there is can it be so retarded it's not working correctly?
Thanks |
01-10-2018, 11:39 PM | #17 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Robin EC25 3GP
Are you sure you have the piston in the right way?
|
01-10-2018, 11:43 PM | #18 |
Not Yet Wild
Join Date: Feb 2016
Location: rogers city mi
Posts: 33
|
Re: Robin EC25 3GP
Yes there is timing. It should be set at 0°. No advance because it runs 180 out for reverse. There is a pulsar line from the back of engine on crank case should be 1/4 rubber fuel line it runs to pump check it for cracks. Check the pump for a torn diaphragm. Check stupid problems before you spend your hard earned cash. Sometimes stuff just gets overlooked we've all done it. I think at this point I would check the reeds too. These are very simple engines I've rebuilt lots of 2 strokes nothing to them. I hope you get this figured out.
|
01-11-2018, 09:05 PM | #19 |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
|
01-11-2018, 09:07 PM | #20 | |
Not Yet Wild
Join Date: Dec 2017
Location: Arizona
Posts: 19
|
Re: Robin EC25 3GP
Quote:
Thanks |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Robin EC25-2pg | Gas EZGO | |||
Robin EC25-3PG Issues | Gas EZGO | |||
Robin EC25 manual | Clone Engine Swaps | |||
robin ec25-2pg sputtering | Gas EZGO | |||
Robin EC25-2PG head shave | Gas EZGO |