|
01-20-2018, 05:12 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2017
Posts: 12
|
Backfire problem
Just rebuilt top end on 84 ezgo Robin 25ec. Back story is it was running and started to backfire before it suddenly stopped running. Piston ring and cylinder were scared pretty bad.
After rebuilt starts and runs, but still has backfire. Any help?? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-20-2018, 06:35 PM
|
#2 |
|
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: Backfire problem
It took me a minute to find the thread with my pictures. http://www.buggiesgonewild.com/gas-e...djustment.html
You need a spring slid over the throttle cable. It prevents backfiring by making sure the fuel plate is completely closed before introducing spark. Right now you let off the gas, but the plate is not fully closed. It allows the engine to load with fuel. Step on the pedal for spark, and bam. Backfire. A backfire will blow your seals out. |
|
|
|
|
01-26-2018, 06:16 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2017
Posts: 12
|
Re: Backfire problem
Thank you Sir!!
Mine was like the other guys....someone put stop nuts on both sides of throttle body. Many THANKS |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Backfire problem | Gas Club Car | |||
| G2 backfire problem | Gas Yamaha | |||
| 1986 G3-a backfire problem | Gas Yamaha | |||
| 1987 Gas - New Backfire Problem | Gas EZGO | |||
| backfire problem | Gas Club Car | |||
Linear Mode
