|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-22-2018, 06:31 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 2
|
2000 ezgo workhorse clutch change
Ok so I’m new to golf carts. I just got a 2000 ezgo workhorse with the Robins 295 engine in it. I tested the compression and both cylinders were at 60 psi.After some research I adjusted the valves with little change. I can’t afford a rebuild so I’m going to put an aftermarket 13hp engine in it. My problem is the old clutch won’t fit on the 1” shaft of the new engine and I can’t afford a $400 new clutch.
My question is can I use a off brand torque converter that takes a 7/8 belt and still use the original driven clutch that takes a 1 3/16 belt? Any help would be much appreciated. Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-23-2018, 06:12 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: 2000 ezgo workhorse clutch change
In short, NO
In the long run that engine swap will cost you more then a rebuild!! What state are you in? |
|
|
|
|
06-26-2018, 11:13 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2018
Posts: 2
|
Re: 2000 ezgo workhorse clutch change
Ok thanks. I’m in Montgomery Texas.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2000 EZGO Workhorse | Gas EZGO | |||
| 2000 Workhorse 1200 clutch won't engage | Gas EZGO | |||
| 2000 EZGo WorkHorse | Golf Carts and Parts | |||
| 2000 workhorse clutch mod | Gas EZGO | |||
| 2000 EZGO Workhorse | Gas EZGO | |||
Linear Mode
