06-04-2019, 05:04 PM | #1 |
Not Yet Wild
Join Date: May 2019
Posts: 4
|
EZ-GO cart
HI Guy's, I working on a EZ-GO Cart 1988. I have the engine out to work on it oversize piston, rings crank seals and weld up one half of the crankcase and muffler mount.
The clutches have a good groove wore into them and the slide buttons are wore also. Is there some place you can get parts for both clutches ? Spring, buttons, ramps, rollers and weights that are wore and rollers that are stuck with flat spots on them now I got two parts books with the golf cart none of them show a brake down of the clutches. Found nothing online Thank You Rod in MN |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2019, 05:56 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: EZ-GO cart
Page K-3 of the 88 manual shows a breakdown of the driven clutch, but no part numbers. A new one from Golf Cart king is $200.
This is a weight, and roller kit from a place call vintage golf cart parts. They have a lot of stuff that I don't see from our sponsors. Part Number: CL22-040 The pdf is an 88 manual. |
06-05-2019, 06:00 PM | #3 |
Not Yet Wild
Join Date: May 2019
Posts: 4
|
Re: EZ-GO cart
Hi No has Worked on A clutch on a golf cart. Or are the clutches just throw away clutches, No one makes replacement parts for the clutch
Thank You Rod in MN |