Yamaha G2 Parts Needed

[CoachTC]

I picked up a G2 and it doesn't have an ignitor or a coil. I have a 10 pin plug for my ignitor. Anyone have either one of these laying around? Let me know, thanks!!

[CP241]

If you’re missing both I’d probably do a HEI conversion with Chrysler parts. Around $50 total and you’re running

[CoachTC]

I was thinking about going in that direction if I didn't get a any response from my request.

I saw your thread from earlier with your G9, what does it change with a G2 and having the 10 pin connector?

[CP241]

Most of the oem wiring I did not use when I did mine. I only grabbed signal from the pickup coil, otherwise I ran all my own wires to power and ground and to the coil.

[CoachTC]

My pin has 7 wires. After looking at the wiring diagrams and your G9 mod diagram, here's what I'm looking at:

1) Br - Power to ballast and ignitor
2) O - from ignitor to coil negative
3) R/W - ballast to coil positive
4) W/B - from pickup to ignitor
5) W/R - from pickup to ignitor
6) B - ground
7) R - oil light, don't use?

Does that look good? What about the ignition coil? Mines missing, should I buy an OEM or is there a better way to go?