|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-02-2010, 10:58 AM | #1 |
Master BS'r
Join Date: Jul 2007
Location: S. Florida
Posts: 1,819
|
Newbie post from an old poster!
Can UTV/ATV rims/tires be mounted on a CC,....be gentle?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-02-2010, 11:08 AM | #2 |
Gone Crazy
Join Date: Dec 2008
Location: Churubusco, IN
Posts: 2,161
|
Re: Newbie post from an old poster!
There are 2 ways this can be done.
New hubs and axles, or have adapters made. UTV/ATV wheels have a different bolt pattern. |
08-02-2010, 03:28 PM | #3 |
Master BS'r
Join Date: Jul 2007
Location: S. Florida
Posts: 1,819
|
Re: Newbie post from an old poster!
Thanks for quick response.
PS What about atv tires on golf cart rims, some have the same dimensions...or am I asking a dumb question. |
08-02-2010, 05:11 PM | #4 |
Gone Crazy
Join Date: Dec 2008
Location: Churubusco, IN
Posts: 2,161
|
Re: Newbie post from an old poster!
You can get golf cart rims to fit some ATV/UTV tires.
Is your cart lifted? That will decide how large of a tire you can fit under your cart. Also the taller the tire, the slower off the line you are, but you will gain more top speed. There are a lot of tire tread patterns for golf cart rims. |
08-02-2010, 08:54 PM | #5 |
Master BS'r
Join Date: Jul 2007
Location: S. Florida
Posts: 1,819
|
Re: Newbie post from an old poster!
I currently have 22" All terrains on a 10" rim(heighth and width is 7-8", 3" offset plus 2" spacers. I want to go to the largest tire on a 10" rim or swap them out for 12" rims to get more tire. I currently have about 2" of clearance on a bad day...not much...may have to cut the front fender wells? I want an aggressive tire and I'm trying to figure out the best way to go about it. My D-380 will turn them, some loss of torque...but I don't think too much to worry about. I have plenty now with my 700amp controller and I run about 26mph fully loaded windshield up. I'm open for suggestions, so far I'm considering "swamp foxes, itp mudlights, or 489....or anything else that looks mean. I'm not worried about smoothness of ride. I have a street cart for that! I'm on a budget, everything stays except rims and tires. Advice please. Thanks in advance.
B |
08-03-2010, 10:29 AM | #6 |
let it SNOW
Join Date: Apr 2009
Location: Marengo OHIO
Posts: 871
|
Re: Newbie post from an old poster!
i think polaris ATV's have the same 4 on 4 bolt pattern
and vega's.. |
08-03-2010, 10:34 AM | #7 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Newbie post from an old poster!
|
08-03-2010, 10:37 AM | #8 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Newbie post from an old poster!
There are adapters out there now. I don't know if any site sponsors have them, they are out there on the Bay.....
http://cgi.ebay.com/1-INCH-BILLET-WH...item1c13f54016 |