2006 CC Transporter/Carryall Build

Kramlinck1 · 02-06-2017, 10:05 PM

I picked up this 2006 CC transporter Fairly cheap, $500 without batteries. I had a set of Batteries that i transferred from another cart. I decided to build it up for my family at our seasonal campground. In the beginning it did not have a roof and had a rear titling bed. I picked up two precedent roofs for free and combined them to make one, which turned out pretty nice and solid. I ordered the front factory strut and made the rear supports out of 1" aluminum. I used the frame from the rear box and made a rear seat and foot platform, and was able to pick up a used bottom cushion that matched for $20. Remaining for the project is making a rear seat back, buying the windshield and installing the Jake's 6" lift and wheelbase extension, which should be on my doorstep tomorrow. Im going to add 22x11-10 tires and wheels, and a fresh coat of paint on the front clip to finish it off. I asked a guy at a local cart place about reprograming the speed setting on the factory curtis 500 amp controller, he said it shouldn't be a problem and is going to charge me $50. I am not sure if that is a good deal or not, but I would like to get rid of the regen and be able to increase the speed. I was just going to send the motor into PQ but i don't know if I'd still have to get the controller reprogrammed in oder to reach higher speeds even with the PQ. I'm not looking to dump a lot of coin into it, but i would like to get near 20 mph if possible. I have kids and don't need to do 25-30, especially in the campground. Anyway, i just thought i would share my project with you guys and feel free to bust my chops.

IMG_1919.jpg

IMG_2009.jpg

IMG_2010.jpg

IMG_2012.jpg

IMG_2013.jpg

Kramlinck1 · 02-06-2017, 10:08 PM

IMG_2016.jpg

IMG_2019.jpg

IMG_2027.jpg

IMG_2029.jpg

IMG_2037.jpg

Kramlinck1 · 02-06-2017, 10:10 PM

IMG_2038.jpg

IMG_2039.jpg

IMG_2050.jpg

IMG_2386.jpg

IMG_2392.jpg

Kramlinck1 · 02-06-2017, 10:11 PM

I have no idea why these photos are in al different directions. Not mac literate.

dundeebarnbuggy · 02-06-2017, 10:28 PM

Looks like you been busy and moreover creative! Like the roof fab! Why would you want to get rid of regen? If it the same controller as mine, [1268], it is tuneable. Really saves the brakes on mine!

Kramlinck1 · 02-06-2017, 11:30 PM

I guess I'm just not used to it with my old cart.The controller is curtis 1520-5501. I'm still learning all the tech stuff on these electric carts. Mainly I'm just looking to gain a few mph and I'm sure its programmed to factory speed setting as is.

Kramlinck1 · 02-06-2017, 11:59 PM

Actually i just looked it up and i believe that my controller (1520-5501) is a remanufactured 1268. I guess i need to figure out which programmer will work and if there will be any problems. Im not sure which programmer the guy i talked to has.

Aflyer · 02-07-2017, 12:14 AM

Quote:

Originally Posted by Kramlinck1

I have no idea why these photos are in al different directions. Not mac literate.

Nice fabrication work on your top!!

Kramlinck1 · 02-07-2017, 12:18 AM

Quote:

Originally Posted by gkcooper

Nice fabrication work on your top!!

Thank you!! I was trying to save a few bucks and was surprised how solid and decent it came out. Maybe I will upgrade it in the future.

lockman1 · 02-07-2017, 07:06 AM

Nice!

Quote:

Originally Posted by Kramlinck1

I have no idea why these photos are in al different directions. Not mac literate.

This may help...

http://www.buggiesgonewild.com/test-...tion-test.html

02-06-2017, 10:05 PM	#1
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	2006 CC Transporter/Carryall Build I picked up this 2006 CC transporter Fairly cheap, $500 without batteries. I had a set of Batteries that i transferred from another cart. I decided to build it up for my family at our seasonal campground. In the beginning it did not have a roof and had a rear titling bed. I picked up two precedent roofs for free and combined them to make one, which turned out pretty nice and solid. I ordered the front factory strut and made the rear supports out of 1" aluminum. I used the frame from the rear box and made a rear seat and foot platform, and was able to pick up a used bottom cushion that matched for $20. Remaining for the project is making a rear seat back, buying the windshield and installing the Jake's 6" lift and wheelbase extension, which should be on my doorstep tomorrow. Im going to add 22x11-10 tires and wheels, and a fresh coat of paint on the front clip to finish it off. I asked a guy at a local cart place about reprograming the speed setting on the factory curtis 500 amp controller, he said it shouldn't be a problem and is going to charge me $50. I am not sure if that is a good deal or not, but I would like to get rid of the regen and be able to increase the speed. I was just going to send the motor into PQ but i don't know if I'd still have to get the controller reprogrammed in oder to reach higher speeds even with the PQ. I'm not looking to dump a lot of coin into it, but i would like to get near 20 mph if possible. I have kids and don't need to do 25-30, especially in the campground. Anyway, i just thought i would share my project with you guys and feel free to bust my chops. IMG_1919.jpg IMG_2009.jpg IMG_2010.jpg IMG_2012.jpg IMG_2013.jpg

02-06-2017, 10:08 PM	#2
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	re: 2006 CC Transporter/Carryall Build IMG_2016.jpg IMG_2019.jpg IMG_2027.jpg IMG_2029.jpg IMG_2037.jpg

02-06-2017, 10:10 PM	#3
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	re: 2006 CC Transporter/Carryall Build IMG_2038.jpg IMG_2039.jpg IMG_2050.jpg IMG_2386.jpg IMG_2392.jpg

02-06-2017, 10:11 PM	#4
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	re: 2006 CC Transporter/Carryall Build I have no idea why these photos are in al different directions. Not mac literate.

02-06-2017, 10:28 PM	#5
dundeebarnbuggy Gone Wild Join Date: Oct 2016 Location: Dundee quebec Posts: 3,190	re: 2006 CC Transporter/Carryall Build Looks like you been busy and moreover creative! Like the roof fab! Why would you want to get rid of regen? If it the same controller as mine, [1268], it is tuneable. Really saves the brakes on mine!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-06-2017, 11:30 PM	#6
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	re: 2006 CC Transporter/Carryall Build I guess I'm just not used to it with my old cart.The controller is curtis 1520-5501. I'm still learning all the tech stuff on these electric carts. Mainly I'm just looking to gain a few mph and I'm sure its programmed to factory speed setting as is.

02-06-2017, 11:59 PM	#7
Kramlinck1 Getting Wild Join Date: May 2015 Location: Chesterfield, MI Posts: 112	Re: 2006 CC Transported/Carryall Build w/pics and controller question Actually i just looked it up and i believe that my controller (1520-5501) is a remanufactured 1268. I guess i need to figure out which programmer will work and if there will be any problems. Im not sure which programmer the guy i talked to has.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
CC carryall or transporter battery 8-6v or 6-8v	Electric Club Car
My 2006 CC Transporter Barn Find w/pics and question.	Electric Club Car
2006 carryall 6 no functions	Electric Club Car
Jakes lift number 6233 work on my 1999 Carryall Transporter?	Lifted Golf Carts