|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-27-2016, 11:36 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2016
Location: S.C.
Posts: 39
|
LED Logo Light
Just got this front logo light for my 2017 Drive cart. It comes with a female pigtail but I can't find where I should plug it to. Anyone got any ideas? I don't see an empty spot to plug to. It needs to come on with the headlights. Thanks for any help.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-27-2016, 12:22 PM
|
#2 |
|
Not Yet Wild
Join Date: Dec 2016
Posts: 26
|
Re: LED Logo Light
Not 100% sure where it should plug into. Worst case scenario you could strip the connector and run it inline after the headlight switch.
Where did you get it? Do you know what color it glows? |
|
|
|
|
12-27-2016, 02:38 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2016
Location: S.C.
Posts: 39
|
Re: LED Logo Light
Not sure where it came from got it as a Christmas gift. I think it is white and lights up the logo behind it.
|
|
|
|
|
12-28-2016, 12:31 AM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: LED Logo Light
You are lucky, very few in the country have that "illuminated emblem", I have not even seen one in person yet. It's a expensive upgrade. Sorry, I can't say how it's connected. (and I feel bad I don't know yet). Don't fry it, we'll figure it out. Probably just 12v. We got a batch of cars without the lights we usually get, then got the "upgrade kit". The LEDs for front turn signals are a nifty "perfectly shaped" led to fit the hole. I will probably be fitting them soon & will add pics & info.
|
|
|
|
|
12-28-2016, 03:10 PM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2016
Location: S.C.
Posts: 39
|
Re: LED Logo Light
Thanks cgtech I will look for your pics when available. I am a little scared to have to cut the whole out for the new LED emblem too.
|
|
|
|
|
12-28-2016, 04:25 PM
|
#6 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: LED Logo Light
Have a part number on the package?
|
|
|
|
|
12-28-2016, 09:54 PM
|
#7 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: LED Logo Light
There are a bunch of those here where I am at. Havent looked to see where they plug in at, Ill check, if an answer don't come too quick
|
|
|
|
|
12-29-2016, 04:18 PM
|
#8 | |
|
Not Yet Wild
Join Date: Sep 2016
Location: S.C.
Posts: 39
|
Re: LED Logo Light
Quote:
Did find in online parts though: https://www.shopyamaha.com/product/d...&dealernumber= |
|
|
|
|
|
12-29-2016, 07:40 PM
|
#9 | |
|
Gone Wild
Join Date: Apr 2011
Location: New Jersey
Posts: 999
|
Re: LED Logo Light
Quote:
|
|
|
|
|
|
12-29-2016, 08:40 PM
|
#10 |
|
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: LED Logo Light
Replaces the OE Tuning Fork logo
12VDC Powered with ignition key Requires a 70mm hole and 15mm depth clearance behind it for mounting Includes all necessary mounting hardware - See more at: https://www.shopyamaha.com/product/d....3eEZbK9K.dpuf |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| E-Z-GO Logo Removal | Electric EZGO | |||
| bigblock logo | Big Block Talk! | |||
Linear Mode
