|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-01-2017, 09:51 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Location: Shell Knob, MO
Posts: 74
|
Driven Clutch Bolt Breaking
A friend has a 2000 ezgo that the driven clutch bolt was lost one time installed a now bolt and bushing, That one broke drill it and got the last part out installed another one broke the first day. So is it the clutch the problem? Now I have part of the bolt in the spline shaft drill and then broke the extractor off in the center of the bolt part any help now on getting it out.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2017, 10:06 PM | #2 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Driven Clutch Bolt Breaking
Is the bolt being torqued or just "winging it"?
|
06-02-2017, 06:14 AM | #3 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Driven Clutch Bolt Breaking
Could be the clutch. After the bolt breaks the clutch is allowed to then be loose and causes excess play on the clutch splines.
|
06-02-2017, 09:07 AM | #4 |
Not Yet Wild
Join Date: Nov 2010
Location: Shell Knob, MO
Posts: 74
|
Re: Driven Clutch Bolt Breaking
Winging it. The clutch wiggles when put on the spline shaft with no bolt installed.
|
06-02-2017, 10:17 AM | #5 |
Gone Wild
Join Date: May 2017
Location: Martinsville, Indiana
Posts: 197
|
Re: Driven Clutch Bolt Breaking
What do you mean by extractor? If it is an easy out, they are very hard and next to impossible to drill. Only hopes would be a cobalt bit and they are expensive.
|
06-15-2017, 03:23 PM | #6 |
Not Yet Wild
Join Date: Nov 2010
Location: Shell Knob, MO
Posts: 74
|
Re: Driven Clutch Bolt Breaking
Got the bolt needs a driven clutch and the drive clutch. More work then he wanted to put in it sold the cart.
|
11-11-2018, 02:01 PM | #7 |
Not Yet Wild
Join Date: Jul 2013
Posts: 14
|
Re: Driven Clutch Bolt Breaking
My bolt has broken for the 2nd time in as many years. This time it took nearly 2 hours after breaking off a few drill bits and a broken bolt extractor. My car is a 97 txt gas. I retaped the hole. Torqued the new grade 3 bolt at 18 foot pounds.
For a 21 year old cart there is a little wobble at low rpm but it levels out at high rpm. How much wobble is acceptable? Any advice would be greatly appreciated |
11-15-2018, 07:34 PM | #8 |
Not Yet Wild
Join Date: Nov 2010
Location: Shell Knob, MO
Posts: 74
|
Re: Driven Clutch Bolt Breaking
You need a new clutch should not wobble.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2011 g29 Driven Clutch bolt | Gas Yamaha | |||
Driven clutch center bolt | Gas EZGO | |||
Driven Clutch Bolt 94 Cart | Gas Club Car | |||
Lost bolt out of driven clutch | Gas EZGO | |||
How to get the big bolt out of the drive clutch without breaking something. HELP!!! | Gas Yamaha |