White/Red Wire Question 48v PDS

[Butch5220]

2006 PDS
Went from 36v to 48v with an onboard charger. The cart will not move unless I have the old charger cord hooked up. Not sure what to do with that white wire with a red stripe. Do I just ground that wire? Do I hook it to 48v? Do I hook it to 36v?
Going to give a speed report soon. It already went 22MPH with just the Alltrax 400 DCX.
Thanks

[scottyb]

http://www.buggiesgonewild.com/elect...-charge-2.html

[Butch5220]

Originally Posted by scottyb

http://www.buggiesgonewild.com/elect...-charge-2.html

I have a 48 volt onboard charger installed. Just don't know what to do with that wire so the cart will run without it being hooked to the old charge cord.

[scottyb]

I told you what to do with it in the last post I made in the thread I linked you to ~ connect it to the pack positive. Some use a fuse, others argue it is not needed.... try it .

[Butch5220]

Originally Posted by scottyb

I told you what to do with it in the last post I made in the thread I linked you to ~ connect it to the pack positive. Some use a fuse, others argue it is not needed.... try it .

Thank you scottyb. I did not realize that your blue lettering indicated a link. Unless you tell me otherwise, I am going to hook it to the full 48v.
Thanks again

[scottyb]

As long as you have a 48v solenoid that should be okay... let us know