|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-04-2011, 02:42 PM | #1 |
Not Yet Wild
Join Date: Jan 2011
Location: Chelsea Al
Posts: 50
|
New controller
I just installed a new DCXX 400a controller on my 06 ezgo pds and I called alltrax about programming and told them i was running 4 gauge cable and the guy told me that i would see a performance upgrade if I would add another 4 guage wire from the M- and B+ on the controller going to the motor. He also said I could change to 2 gauge but would probably be cheaper just adding another 4 guage. Anyone else do this
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2011, 03:51 PM | #2 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: New controller
i really dont see how it would increase performance by adding another 4ga. wire with a 400 amp controller.
now if you are using a low strand 4ga instead of a high strand 4ga then it could help alittle, but i doubt you would notice it. |
03-04-2011, 04:38 PM | #3 |
Not Yet Wild
Join Date: Jan 2011
Location: Chelsea Al
Posts: 50
|
Re: New controller
Well thats what i thought but did not know
|
03-04-2011, 04:42 PM | #4 |
Gone Wild
Join Date: Nov 2010
Location: Charleston, SC
Posts: 539
|
Re: New controller
So you currently have 4ga wire on the M- and B+ ? And Alltrax said to add an additional 4ga cable to each connector?
|
03-04-2011, 06:47 PM | #5 |
Gone Crazy
Join Date: Nov 2008
Location: Pine Hill NJ
Posts: 560
|
Re: New controller
I'm in the process of doing the same thing to a 99 DCS and when I talked to Alltrex today they told me ALL the cables should be 4 gaugeand recommended Welding cable so that what I'm a doin, tonight!
|
03-05-2011, 03:13 PM | #6 |
Not Yet Wild
Join Date: Jan 2011
Location: Chelsea Al
Posts: 50
|
Re: New controller
Yep thats what they said
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
controller HELP!! | Electric EZGO | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
controller getting hot | Electric EZGO |