10-21-2012, 04:52 PM | #1 |
Not Yet Wild
Join Date: Aug 2012
Posts: 8
|
Valve job / Fail
Help..just redid my valves.. cart all back together but refuses to start.. getting spark and gas but nothing.. any ideas of something I might be missing to check on.. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-21-2012, 05:21 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: Valve job / Fail
Timing belt not on right, or valves to tight??
|
10-21-2012, 05:24 PM | #3 |
Not Yet Wild
Join Date: Aug 2012
Posts: 8
|
Re: Valve job / Fail
I really need help on this timing belt thing..Im thinking that maybe that is the problem..I followed the diagram for lining it back up after removing it but still not sure I did it right..
|
10-21-2012, 05:25 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Valve job / Fail
Are the valves adjusted properly,If they are adjusted at the wrong timing,they won't open/close properly which will cause compression-loss and also retarded/advanced timing.If the Timing-Belt is off-time your valves will be too.Hope this helps.
|
10-21-2012, 05:32 PM | #5 |
Not Yet Wild
Join Date: Aug 2012
Posts: 8
|
Re: Valve job / Fail
is it possible to check timing without pulling the motor apart
|
10-21-2012, 06:12 PM | #6 |
Not Yet Wild
Join Date: Aug 2012
Posts: 8
|
Re: Valve job / Fail
ok..my bad.. he did not follow the diagram on putting the timing belt back on.. he marked it and put it back on the identical way it came off.. sorry for the confusion
|
10-22-2012, 06:08 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: Valve job / Fail
Ok great, soooo does that meen its up and running now??
|
10-22-2012, 07:28 PM | #8 |
Gone Wild
Join Date: May 2011
Location: Las Vegas NV
Posts: 330
|
Re: Valve job / Fail
If the timing belt is not installed properly, it is also possible that instead of gas getting into the carb, gas is spewed out. Re-check alignment of the dots.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Batteries Fail to Charge | Electric Club Car | |||
G1 Muffler BBQ Fail? | Gas Yamaha | |||
Ultimate Fail. | Videos |