|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-29-2013, 09:36 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 21
|
Removing back rest from 99 ez go
So i bought a new seat cover to replace my old one, and i go outside to put it one, and lo and behold, i have to way to get the back pad off. It looks like it's attached with 4 rivets and i have no clue how to get them off. Any help?
Fwiw, the bench comes off just fine |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-29-2013, 09:47 PM | #2 |
Guest
Posts: n/a
|
Re: Removing back rest from 99 ez go
they should be push rivets
push center all the way through with a small nail / screw driver |
09-29-2013, 09:53 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Posts: 21
|
Re: Removing back rest from 99 ez go
Push them through the back rest padded side and they should just pop out the back end u mean? Seems like that would be pretty tough wouldn't it? Maybe i'm confused
|
09-29-2013, 10:01 PM | #4 |
Guest
Posts: n/a
|
Re: Removing back rest from 99 ez go
no .. push from back into seat
center pin will pop through |
09-29-2013, 10:21 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Removing back rest from 99 ez go
correct me if I'm wrong but I think those are 4 screws holding the cushion in place.
|
09-29-2013, 10:21 PM | #6 |
Getting Wild
Join Date: Aug 2013
Location: Florida
Posts: 88
|
Re: Removing back rest from 99 ez go
Just took 3 of those apart (2, 02s and 97 mdls) and they all had hex head screws, can't remember the size off hand though.
|
09-29-2013, 10:24 PM | #7 |
Guest
Posts: n/a
|
Re: Removing back rest from 99 ez go
thats what i thought too.. but he said they were rivets ??????
|
09-29-2013, 10:33 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Removing back rest from 99 ez go
Yeah, toques head screws
|
09-29-2013, 10:51 PM | #9 |
Not Yet Wild
Join Date: Aug 2013
Posts: 21
|
Re: Removing back rest from 99 ez go
Wow, maybe they were hex screws...they were so beat up looking and stripped that i thought they must be rivets. I'll check again tomorrow. Thanks
|
09-30-2013, 05:39 AM | #10 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Removing back rest from 99 ez go
If they're just stripped out screws, try and bite into their edges with a pair of vice-grips. Failing that, I've had good luck with these:
http://www.sears.com/craftsman-7-pc-...a=00952157000P |
Tags |
bought new seat cover |
|
|
Similar Threads | ||||
Thread | Forum | |||
wanted TXT back rest | Golf Carts and Parts | |||
EZGO TXT Seat back rest Wanted | Golf Carts and Parts | |||
where is the best place to check about replacing my seat and back rest on my 96 DCS?? | Electric EZGO | |||
back rest for 92 cc ds | Gas Club Car | |||
Williamson rear seat back rest brackets | Electric EZGO |