![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Jun 2016
Location: Prescott, WI
Posts: 16
|
![]() I bought my G29 last year and had know idea what I was buying, just wanted one. It came with a 6" Jakes lift kit. I didn't know any better until someone mentioned to me that the CAM needed to be adjusted on my front wheels (easier said than done). The wheels are \\-//. I know there is no CAM adjustment. The shocks are stock. Do I need to get longer shocks.
I've been looking through posts, but have not been able to pin point what I should do to make the adjustment. Please help. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Getting Wild
![]() Join Date: Apr 2017
Location: SML. VA
Posts: 145
|
![]() Did you back it into that spot? Put 2 people on it and drive it forward 2ft and look at it. I don't think there is an adjustment.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Jun 2016
Location: Prescott, WI
Posts: 16
|
![]() No, I did not back it into the spot. I also put about 350#s in the front seat and it looked the same. I know there is no cam adjustment. Are there any other ways to get the tires to "lay flat"?
|
![]() |
![]() |
![]() |
Tags |
arm knuckle, cam adjustment, jakes lift kit, shock absorbers |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Help!!!!! Pot adjustment??? | Electric Club Car | |||
low end adjustment | Gas EZGO | |||
Its adjustment | Electric EZGO | |||
Adjustment help on G1? | Gas Yamaha | |||
just a little gov. adjustment?? | Gas EZGO |