|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-09-2015, 11:30 AM | #11 |
Not Yet Wild
Join Date: Feb 2015
Posts: 13
|
Re: 2001 EZGO TXT - new solenoid wont run
And do you know if there is a good way of checking the speed control without investing in a new controller?
And if I purchase a new controller and that isn't the part will most places take them back on a return? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2015, 11:33 AM | #12 |
Not Yet Wild
Join Date: Feb 2015
Posts: 13
|
Re: 2001 EZGO TXT - new solenoid wont run
And thank you for all of the help.
|
02-09-2015, 11:42 AM | #13 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO TXT - new solenoid wont run
Quote:
2. Check the vendor's return policy before purchasing. |
|
02-09-2015, 12:51 PM | #14 |
Not Yet Wild
Join Date: Feb 2015
Posts: 13
|
Re: 2001 EZGO TXT - new solenoid wont run
Thanks JohnnieB
|
02-09-2015, 03:03 PM | #15 |
Gone Wild
Join Date: Jun 2014
Posts: 365
|
Re: 2001 EZGO TXT - new solenoid wont run
I had an old TXT series doing this a while back. Charged up it would run for a few minutes, then just die. It had some old wires and they simply weren't up to the task. A new set around and it ran normal again. Sometimes, electrical can be the bane of your existence. I spent three days on an ezgo a while back working with Johnnie using diagrams and whatnot. Ended up being a $2 microswitch.
|
02-22-2015, 08:32 AM | #16 |
Not Yet Wild
Join Date: Feb 2013
Location: North Texas
Posts: 7
|
Re: 2001 EZGO TXT - new solenoid wont run
Gents - just replaced the reed switch yesterday and now the reverse buzzer will sound. Gave the cart a good 6 hour charge and no movement. I can hear the new cyloniod clicking....
Should I start looking for a new controller? And any recommendations on where to purchase? |
02-22-2015, 09:24 AM | #17 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO TXT - new solenoid wont run
A PDS with an Alltrax DCX400 controller will do in the low to mid twenties at 36V.
http://www.cartsunlimited.net/Custom_Options.html |
03-13-2015, 09:12 AM | #18 | |
Not Yet Wild
Join Date: Feb 2015
Posts: 13
|
Re: 2001 EZGO TXT - new solenoid wont run
Quote:
|
|
03-13-2015, 09:43 AM | #19 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2001 EZGO TXT - new solenoid wont run
Quote:
J1 Pins 1, 3, 4, 5, 7, 8 & 9 J3 Pins 1, 2, 3 & 4 J4 Pins 1 & 2 Once we get the solenoid to click, we can look at the other stuff if need be. |
|
03-13-2015, 11:58 AM | #20 | |
Not Yet Wild
Join Date: Feb 2015
Posts: 13
|
Re: 2001 EZGO TXT - new solenoid wont run
Quote:
Checked all batteries, all showing 6.4-6.8 J1- 6=31.5 7=.5 10=.5 J3 1-2 nothing, 3=.5 4=31.5 J4 1-2 - no voltage Last edited by Bradray77; 03-13-2015 at 02:43 PM.. Reason: Re-checked |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
95 Ezgo DCS, no solenoid click, wont go | Electric EZGO | |||
2001 EZGO Series TXT Solenoid wiring | Electric EZGO | |||
94 EZGO wont go solenoid no click | Electric EZGO | |||
EZGO -wont GO, solenoid? | Electric EZGO |