|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-10-2016, 11:23 AM | #11 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV reverse switch malfunctions? I have error codes
I have read over all the rxv posts here ( over 500 pages to go thru), looking for this answer. Many, many posts with the same symptoms ( turn key to reverse. no go, but get clicks-lurch- and buzzer). NO ANSWER!
Hand held does not pinpoint this. The only thing at one time the handheld said reverse buzzer, but as i said, after replacing and then eventually reinstalling original, didn't help. Amazes me that this issue hasn't been solved. Last thing i did, was to pull the batteries out, and i cut open the wire harness, all the the way to the cup holder, no corrossion! So its not key switch, solenoid, reverse buzzer, wire harness, batteries, charge recept, tow switch. Tuesday i will swap out controller with a know good working one ( danaher), if that doesn't help, i don't see whatelse there is to check? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-10-2016, 11:55 AM | #12 |
Gone Wild
Join Date: Oct 2012
Location: Canyon Lake, TX
Posts: 628
|
Re: RXV reverse switch malfunctions? I have error codes
I'm no technician, however I had this thought. ..
you know how the cart will time out if you let it sit. When the cart times out it takes a couple taps on the accelerator to get things going again. Is this time out function related to the controller and relays and somehow be associated to the issue you experience if there is a time out calculation malfunction? Again just a thought. Hope you find a solution soon. |
01-10-2016, 12:38 PM | #13 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV reverse switch malfunctions? I have error codes
doug, thanks for that, but that is not the issue here. I can get this thing to drive, then stop turn it off and try to turn back on and no go.
Very bazaar deal, but i don't think it is a uncommon problem based on the many posts on here. It seems people come here with this problem, and if it is not the brake or encoder, they are stuck. Then we never hear from them again, as to what they ended up doing. |
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
600 amp alltrax error codes | Electric EZGO | |||
Alltrax SPM no error codes but not working | Extreme DC! | |||
OBC Error codes | Electric Club Car |