|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
12-20-2017, 05:10 PM
|
#21 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 16
|
Re: Will a Curtis 1205M-5603 controller work?
At 100% throttle, the arm is past the last pad.
When I get the "click" there is no voltage until the Arm is covering pad 2, then it gets 0.6v. If I'm understanding your suggestion properly. I want to basically jump the first and second pads together? If so, is there an easy method to doing this? It's a tight reach in there, but I can see the purple wire is connected to a switch inside there. I'm guessing something like this??? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-20-2017, 05:11 PM
|
#22 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 16
|
Re: Will a Curtis 1205M-5603 controller work?
I do appreciate all the help though!!! I promise I have read read and read to try and understand this stuff before I started asking for help. :)
|
|
|
|
|
12-20-2017, 05:54 PM
|
#23 |
|
Gone Wild
 Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Will a Curtis 1205M-5603 controller work?
That is right, the post #2 and #3 on the diagram below:
 This is a view from the resistors side:  Unfortunately I don't have any direct experience working on those carts, but it looks like it would be easier if you remove the multi-Step from the cart. The pad in the arm should be touching the last pad only (the one with the white/black wire), but not past it... |
|
|
|
|
12-20-2017, 07:09 PM
|
#24 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 16
|
Re: Will a Curtis 1205M-5603 controller work?
Yeah it defiantly goes past the last pad by about half the pad.
I’ll see if I can get to the back of the vglide. But at least now I have a fully functioning cart so thanks again! |
|
|
|
|
03-30-2022, 02:27 PM
|
#25 |
|
Not Yet Wild
Join Date: Mar 2022
Posts: 1
|
Re: Will a Curtis 1205M-5603 controller work?
Anyone know a reliable place to get a $250. 1205M-5603 ?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Swapping Curtis Controller 1204 to 1205M | Electric Club Car | |||
| Help with Curtis controller model 1205M-5601 | Electric golf carts | |||
| 1985 electric EZGO Marathon WILL A CURTIS 1204-410 CONTROLLER WORK ON IT? | Electric EZGO | |||
| Troubleshooting Curtis 1205M controller | Electric EZGO | |||
| Curtis 1205M on a 98 model ezgo | Extreme DC! | |||
Linear Mode
