|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-29-2017, 08:18 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
rubbing problem
Need some help on a rubbing problem.
Put a work horse front cowling with the fender flares on a txt. I'm running 12inch wheels and I need the body to be about 1/2 inch higher. Is there any way to get that much lift without a lift kit? I was thinking about a spacer under the front leaf spring. Thanks Sonny |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2017, 02:16 PM | #2 |
Gone Wild
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: rubbing problem
A reciprocating saw can easily accommodate the 1/2 inch clearance needed... My buddy has a Western body on his cart. Then he put really wide tires and 12 inch rims on, which required the use of the reciprocating saw... Works great now.
|
08-30-2017, 07:37 PM | #3 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
Re: rubbing problem
Thanks for the reply, but I sure don't want to cut anything. Cost way to much.
Sonny |
|
|
Similar Threads | ||||
Thread | Forum | |||
G11 Tires Rubbing | Gas Yamaha | |||
Rear rubbing | Electric Yamaha | |||
tires rubbing | Lifted Golf Carts | |||
rubbing issue | Electric EZGO | |||
rubbing problem need advise | Electric Club Car |