48 volt txt no forward and the reverse buzzer sounds in any position

gofast67 · 02-20-2019, 04:55 PM

Hello BGW friends. I am having an issue with a cart I picked up on the cheap. Apparently they had a rusted out 48 chassis and moved all of the electronics over to the new frame with motor also. When you put in forward it does nothing,no click or anything. Put it in reverse and all runs. Also the reverse buzzer is constantly going off in any gear selection and neutral. Guess this is why I got it on the cheap. Any ideas what to look for. Tyia

gofast67 · 02-20-2019, 04:57 PM

I have checked and the wiring at the selector switch is correct and is working.

Cobra,1 · 02-20-2019, 07:31 PM

48 volt txt? Did you download manual from sticky’s?more info on what type of cart may help get more response.😊

Brob1969 · 02-21-2019, 12:47 PM

If the reverse buzzer is continually going off, then it's pretty likely that some of your low voltage wiring is incorrect.

I also recently purchased a cart that had been wired incorrectly and I basically just pulled up the correct wiring diagram and went through the entire system one wire at a time. During the process I discovered what likely prompted the botched wiring job; my FNR switch was bad.

Sent from my SAMSUNG-SM-G870A using Tapatalk

02-20-2019, 04:55 PM	#1
gofast67 Gone Wild Join Date: Nov 2012 Posts: 334	48 volt txt no forward and the reverse buzzer sounds in any position Hello BGW friends. I am having an issue with a cart I picked up on the cheap. Apparently they had a rusted out 48 chassis and moved all of the electronics over to the new frame with motor also. When you put in forward it does nothing,no click or anything. Put it in reverse and all runs. Also the reverse buzzer is constantly going off in any gear selection and neutral. Guess this is why I got it on the cheap. Any ideas what to look for. Tyia
gofast67 Gone Wild Join Date: Nov 2012 Posts: 334

02-20-2019, 04:57 PM	#2
gofast67 Gone Wild Join Date: Nov 2012 Posts: 334	Re: 48 volt txt no forward and the reverse buzzer sounds in any position I have checked and the wiring at the selector switch is correct and is working.
gofast67 Gone Wild Join Date: Nov 2012 Posts: 334

02-20-2019, 07:31 PM	#3
Cobra,1 Gone Wild Join Date: Sep 2018 Location: Md. Posts: 1,059	Re: 48 volt txt no forward and the reverse buzzer sounds in any position 48 volt txt? Did you download manual from sticky’s?more info on what type of cart may help get more response.😊

02-21-2019, 12:47 PM	#4
Brob1969 Gone Wild Join Date: Feb 2019 Location: North Florida Posts: 271	Re: 48 volt txt no forward and the reverse buzzer sounds in any position If the reverse buzzer is continually going off, then it's pretty likely that some of your low voltage wiring is incorrect. I also recently purchased a cart that had been wired incorrectly and I basically just pulled up the correct wiring diagram and went through the entire system one wire at a time. During the process I discovered what likely prompted the botched wiring job; my FNR switch was bad. Sent from my SAMSUNG-SM-G870A using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
2014 Club Car Precedent Buzzer sounds in Neutral and Reverse	Electric Club Car
Reverse buzzer sounds even when not in reverse	Columbia ParCar
Reverse Buzzer Sounds When in Forward and Cart will not move	Electric EZGO
94 Club Car Alarm Sounds in Forward and Reverse	Electric Club Car
Reverse alarm sounds in Forward, wont go forward or reverse	Electric Club Car