|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-17-2016, 05:22 PM | #1 |
Gone Wild
Join Date: Jul 2013
Location: N. Myrtle Beach
Posts: 151
|
Torque RXV Castle Nut (Run or Tow)
When I torque the rear castle nut should the Cart be in Run or Tow? I'm thinking if its switched to tow no harm will be done to the brake but if its in run mode the brake will hold the axle in place and make it easy to torque.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-18-2016, 01:13 PM | #2 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Torque RXV Castle Nut (Run or Tow)
Parking brake will not be harmed when torquing nut down.
|
04-18-2016, 10:46 PM | #3 |
Gone Wild
Join Date: Jul 2013
Location: N. Myrtle Beach
Posts: 151
|
Re: Torque RXV Castle Nut (Run or Tow)
Good Deal, In was worried the impact driver might be a little rough on the brake.
|
04-18-2016, 11:22 PM | #4 |
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: Torque RXV Castle Nut (Run or Tow)
You could use an impact in tow mode I guess as well. It don't care if wheel spins. I tighten my car lugs in free spin :-)
I would think your hand can hold it as the impact tightens. |
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV Rear Axle Castle Nut Size | Electric EZGO | |||
The castle nut keeps spinning | Electric EZGO | |||
Removal of rear hub castle nut | Electric EZGO | |||
over tightened castle nuts :( | Electric EZGO | |||
98 TXT tie rod castle nut | Electric EZGO |