95 EZGO Medalist speed control

[Broke down Stu]

I have a 95 EZGO 36 V Medalist that would stop for a while then go again. after about a year it finally would not go and had to tow back to the house. I replaced the batteries and did some testing following the Technicians Repair Service Manual 28646-G401 using a DVOM all signs pointed towards the speed controller. I removed the controller took it to my local EZGO dealer because I could not find the controller on line, my dealer found the part # and cannot even get from EZGO.
My question is; is there another controller with the three connectors that can replace the four connector controller i have?

Thank you,

[buckeyejudge]

You can send that one off to get rebuilt. I've used ControllerMD with good results.

www.controllermd.com
Casey
(912) 634-3534



Sent from my LG-M430 using Tapatalk

[bobbycason]

If your cart is a series Go with the Alltrax SR48500 from ScottyB, he can program it to run on 36v now and if you decide to upgrade to 48v in the future you can change it with the alltrax toolkit.

https://www.cartsunlimited.net/alltrax-sr-series--.html