Electrical Problem

[integraracing04]

I just replaced the solenoid with a new factory replacement because i was affraid it was sending voltage back through the system causing the wires to smoke and become hot. I replaced that and rewired what i thought was the proper system but for some reason, with the key on and directional switch in forward the cart fries the little micro switch in the footbox at the hit of the throttle pedal. The cart is a 2000 series 36 volt. If some one could send me a picture of their existing wiring on their cart that be great just cause these **** diagrams keep either screwing me up or i think theres just something simply wrong.

[Paxdad]

Did you remove the diode on the orignal solenoid? If so you probably installed it backwards. The silver band on the diode goes on the small solenoid post with the yellow wire.