ezgo rxv

pontiac461 · 07-27-2012, 04:53 PM

does anyone know who manufactures the ac drive controller for e-z-go for the rxv? i have several years experience programming commercial ac drive controllers. there is a chance i have or could get software for the ac controller.

Xtreme Cartz · 07-30-2012, 11:20 PM

Quote:

Originally Posted by Jerj7907

Its to stop wheel spin on a golf coarse.

Does not stop wheel spin too effectively if a stock RXV can do doughnuts on the grass.

Jerj7907 · 07-31-2012, 06:11 AM

You have to force it to do donuts. If on the fairway push full acceleration and it slowly takes off. Slightly wet grass and turn the wheel in one direction and once moving it will sling the rear end around. Big difference. You have to know the carts characteristics to do it. At a dead stop nothing.

jpb31 · 08-04-2012, 12:56 PM

any updates on the rxv ?

kgsc · 08-04-2012, 01:08 PM

Quote:

Originally Posted by wj3371

I work at Mr. Golf Carts (mrgolfcartsinc.com) in Waynesboro Ga and we are working on a computer program that will give the RXV the ability to have full torque and speeds up to 40mph. Stay tuned and i will try to keep you guys updated on our progress.

Quote:

Originally Posted by Jerj7907

wj3371, I am within 2 hours. When you all get it working I will be one of the first in line. Will this be posted on your works website?

I'm closer..

But I'll take second in line.. Will you need a special programmer or just to know the code for the factory unit ?

Jerj7907 · 08-04-2012, 03:10 PM

I'm sure there would be a long line. Don't see how someone could go wrong if they produced a programmer that would release the full potential of the RXVs torque. It seems to be the only complaint about these things.

kgsc · 08-04-2012, 07:38 PM

Pretty sure the speed part is a Federal safety thing.. I think the max speed it can leave the plant on in a plain stock configuration is like 15 mph. Torque, I'm not sure but if they make it available, I'm all over it.

LuvMyTJ · 08-20-2012, 02:37 PM

Subscribed

jpb31 · 08-20-2012, 07:00 PM

well after 6 weeks and hours and hours of phone calls and 2 ezgo dealers working on this problem with countless phone calls to ezgo. found out the low torqe problem cant be solved . and 2012 is and will be the last year the rxv will be made because of countless problems. so the guy that built my custom cart for hunting has agreed to refund my money. so good luck to you rxv guys

kgsc · 08-20-2012, 07:40 PM

EZ Go did release a new update for the RXV program and it does allow it to accelerate faster but still does not have the low end it could. And EZ discontinuing them I had not heard. May have to shake some bushes around here..

07-27-2012, 04:53 PM	#21
pontiac461 Not Yet Wild Join Date: Oct 2011 Posts: 4	Re: ezgo rxv does anyone know who manufactures the ac drive controller for e-z-go for the rxv? i have several years experience programming commercial ac drive controllers. there is a chance i have or could get software for the ac controller.
pontiac461 Not Yet Wild Join Date: Oct 2011 Posts: 4

07-31-2012, 06:11 AM	#23
Jerj7907 Gone Wild Join Date: Apr 2012 Location: Georgia Posts: 378	Re: ezgo rxv You have to force it to do donuts. If on the fairway push full acceleration and it slowly takes off. Slightly wet grass and turn the wheel in one direction and once moving it will sling the rear end around. Big difference. You have to know the carts characteristics to do it. At a dead stop nothing.

08-04-2012, 12:56 PM	#24
jpb31 Not Yet Wild Join Date: May 2010 Posts: 27	Re: ezgo rxv any updates on the rxv ?
jpb31 Not Yet Wild Join Date: May 2010 Posts: 27

08-04-2012, 03:10 PM	#26
Jerj7907 Gone Wild Join Date: Apr 2012 Location: Georgia Posts: 378	Re: ezgo rxv I'm sure there would be a long line. Don't see how someone could go wrong if they produced a programmer that would release the full potential of the RXVs torque. It seems to be the only complaint about these things.

08-04-2012, 07:38 PM	#27
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,146	Re: ezgo rxv Pretty sure the speed part is a Federal safety thing.. I think the max speed it can leave the plant on in a plain stock configuration is like 15 mph. Torque, I'm not sure but if they make it available, I'm all over it.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-20-2012, 02:37 PM	#28
LuvMyTJ Not Yet Wild Join Date: Aug 2012 Location: Western New York Posts: 29	Re: ezgo rxv Subscribed

08-20-2012, 07:00 PM	#29
jpb31 Not Yet Wild Join Date: May 2010 Posts: 27	Re: ezgo rxv well after 6 weeks and hours and hours of phone calls and 2 ezgo dealers working on this problem with countless phone calls to ezgo. found out the low torqe problem cant be solved . and 2012 is and will be the last year the rxv will be made because of countless problems. so the guy that built my custom cart for hunting has agreed to refund my money. so good luck to you rxv guys
jpb31 Not Yet Wild Join Date: May 2010 Posts: 27

08-20-2012, 07:40 PM	#30
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,146	Re: ezgo rxv EZ Go did release a new update for the RXV program and it does allow it to accelerate faster but still does not have the low end it could. And EZ discontinuing them I had not heard. May have to shake some bushes around here..