|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-20-2017, 07:34 AM | #1 |
Not Yet Wild
Join Date: Jan 2017
Posts: 1
|
Suspension adjustment
I installed a rhox 6 inch a-arm lift kit on a 2008 Yamaha Drive. When I put it back together the rear axle is offset by about two inches on the passenger side not allowing for the rear torsion bar to be attached. is there away to reposition the rear axle.to get it to align.
Thanks for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-20-2017, 09:20 AM | #2 |
Getting Wild
Join Date: Dec 2016
Location: Ellis Co., TEXAS
Posts: 91
|
Re: Suspension adjustment
Yes, push it over! The control arms keep the axle from twisting and the torsion/track bar is to keep axle centered. Just push it where it needs to go.
|
01-20-2017, 02:44 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Suspension adjustment
The problem is the angle now on the panhard bar. Kit should have come with a bracket to relocate it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
low end adjustment | Gas EZGO | |||
Its adjustment | Electric EZGO | |||
Adjustment help on G1? | Gas Yamaha | |||
just a little gov. adjustment?? | Gas EZGO | |||
Suspension | Gas Club Car |