|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-22-2017, 02:40 PM | #1 |
Not Yet Wild
Join Date: Oct 2016
Posts: 8
|
How to remove starter pulley off crankshaft
Does anybody know a good trick for removing the starter pulley off the crankshaft? I removed the clutch easily but I can not get the pulley off. I'm not real sure how it comes off. Any help would be appreciated. This is on a robins 244cc motor.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-22-2017, 05:31 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: How to remove starter pulley off crankshaft
That pulley is part of the clutch. It should have all come off together as a unit. It sounds like you split the clutch in half.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clutch pulley contacts starter pulley/belt | Gas Harley Davidson | |||
low compression, jumped time maybe, how to remove the crank pulley? | Gas EZGO | |||
G1 Starter Pulley | Gas Yamaha | |||
Pulley OD for starter/gen RPM | Clone Engine Swaps | |||
How To Remove Crankshaft | Gas EZGO |