|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-30-2017, 04:27 PM | #1 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
B2 does not fit YDRE
B2 does not fit YDRE ~ does anybody know what axle the YDRE has in it?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2017, 04:41 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: B2 does not fit YDRE
07-14 (I think 14) had Team axle. Newer are back to Dana/schaffer. Both readily take all common 19 spline motors as far as I know. AS LONG AS the overall motor length does not interfere with rear coilover. I have put aftermarket motors on many team axles, but none on newer yet.
|
07-06-2017, 08:06 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: B2 does not fit YDRE
This is interesting as the common belief is both Ezgo and Yamaha take the 19 spline shaft and therefore they use the same motors BUT - the YDRE has a different casting that prevents the popular Admiral B2 from fitting up to the differential. See pics. The centering ring is solid on the YDRE and it is mostly removed leaving just 3 small sections which fit in between the windings on the Ezgo. I hope this saves somebody a big headache.
|
07-06-2017, 09:45 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: B2 does not fit YDRE
I have put GE & AMD motors on that Team axle no problem, never tried an Admiral. Good to know.
|
07-06-2017, 10:49 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: B2 does not fit YDRE
I'm told the windings are too close to the end of the can
|
07-06-2017, 06:54 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: B2 does not fit YDRE
That motor adapter is very easily removable from the axle, just a couple bolts. I would be clearancing that rim to allow it to fit. I know it's a pain, I don't like the Team axles either, and Yamaha doesn't use them anymore.
|
07-06-2017, 07:38 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: B2 does not fit YDRE
Is that right? What years did they make them like the one I showed?
|
07-06-2017, 08:23 PM | #8 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: B2 does not fit YDRE
2014 was last year for Team axle. All Drives from '07-14 had Team axle.
Here's a awesome link for legit Yamaha parts lookup. (I couldnt remember change year). https://www.shopyamaha.com/parts-catalog/lines/golfcar |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is a G29 and a YDRE the same? | Electric Yamaha | |||
G29 YDRE info | Electric Yamaha | |||
YDRE That doesn't Drive.. | Electric Yamaha | |||
YDRE, again | Electric Yamaha | |||
Better headlights for YDRE? | Electric Yamaha |