|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-18-2017, 07:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
G22E will not go more than a foot
I bought the cart & it ran great for 3 days. I have tested the batteries & the are charged at 53v. I just installed a new HD solenoid because it tested bad. Goes about a ft & wont move. I have put it up on jacks & ran through multiple voltage test. Everything seems good. On jacks I can push the pedal to the floor & nothing, I spin the back tires & push the pedal & it will go wide open. As soon as I let it stop, it won't go again until I spin the tires. Any ideas???
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-18-2017, 11:17 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G22E will not go more than a foot
Sounds like motor brush problem, you have an early GE motor G22?
|
|
|
|
|
08-18-2017, 11:32 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
Re: G22E will not go more than a foot
The motor is a model DM430-06
|
|
|
|
|
08-19-2017, 06:14 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
Re: G22E will not go more than a foot
Ok, took the motor out & it was slap full of black dust. The main shaft has a bit of play inside the housing. The brushes actually look ok! What next? I'm stumped & need an experts advise. Thanks
|
|
|
|
|
08-19-2017, 08:20 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
Re: G22E will not go more than a foot
IMG_1358.jpg
Notice the left side looks untouched & the right side is shiny. Could this be my problem? I had 2 that were stuck & not sliding & 2 that were sliding. |
|
|
|
|
08-19-2017, 10:24 PM
|
#6 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
Re: G22E will not go more than a foot
Well problem was the brushes. Got it fixed, now gonna order new brushes to replace the old ones.
|
|
|
|
|
08-19-2017, 10:44 PM
|
#7 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: G22E will not go more than a foot
The brushes look like they have a lot of life left. You really don't have to change them if you don't want too
|
|
|
|
|
08-20-2017, 02:35 PM
|
#8 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 6
|
Re: G22E will not go more than a foot
I'm probably just gonna buy a set to have on hand just in case. I wonder how many people have had this problem? There was so much black dust in the motor it was causing the brushes to stick. A can of brake clean & it's like new. I guess I know what yearly maintenance I need to do to the motor now.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Foot pegs | Design Center | |||
| 81 ds will go 1 foot in f/r and stop? | Electric Club Car | |||
| 2 Foot thats it? | Electric EZGO | |||
| 16 foot Big Tex trailer $850.00 | Autos/Side x Sides/ATVs/4x4's | |||
| Custom Anderson Car Hauler 22 foot by 8 foot wide Open Steel Deck. $4700.00 | Autos/Side x Sides/ATVs/4x4's | |||
Linear Mode
