|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-21-2018, 06:56 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2014
Location: Fort White, Fl.
Posts: 9
|
2004 Clays Car Engine size
I have a 2004 Clays Car. It surges at low speeds and I am thinking it is the carburetor. I figured I would just replace it. Problem is I am not sure if the engine is the 295 or 350cc.
Thanks in Advance Rick |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-22-2018, 06:30 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Should have a tag on the motor, eh295 or eh350 with a serial number.
Could it be a linkage adjustment problem? Welcome to the board Rick. |
|
|
|
|
05-22-2018, 07:01 AM
|
#3 | |
|
Not Yet Wild
Join Date: Oct 2014
Location: Fort White, Fl.
Posts: 9
|
Re: 2004 Clays Car Engine size
Quote:
I just went out and looked at it, I took a pic of it but I guess because my post count is so low I can't attach it. Anyway the number started with eh352 not really sure if I looked at the right tag or not it was on the timing chain cover. It may be a linkage adjustment but at a steady low throttle position it lurches back and forth. |
|
|
|
|
|
05-22-2018, 07:11 AM
|
#4 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Sorry I posted wrong, That is a 350.
|
|
|
|
|
05-22-2018, 07:16 AM
|
#5 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Do you have linkage running in front of timing cover? if so it has to have a little slack in it.
|
|
|
|
|
05-22-2018, 07:29 AM
|
#6 | |
|
Not Yet Wild
Join Date: Oct 2014
Location: Fort White, Fl.
Posts: 9
|
Re: 2004 Clays Car Engine size
Quote:
|
|
|
|
|
|
05-22-2018, 07:30 AM
|
#7 | |
|
Not Yet Wild
Join Date: Oct 2014
Location: Fort White, Fl.
Posts: 9
|
Re: 2004 Clays Car Engine size
Quote:
|
|
|
|
|
|
05-22-2018, 07:30 AM
|
#8 | |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Quote:
|
|
|
|
|
|
05-22-2018, 07:32 AM
|
#9 | |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Quote:
|
|
|
|
|
|
05-22-2018, 07:39 AM
|
#10 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: 2004 Clays Car Engine size
Might want to jack the rear up and run it, see if the governor is moving the linkage back and forth at low speed.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Connecting turn signal/amber running lights on 2004 ST/Clays Car | Gas EZGO | |||
| Windshield 2004 Clays Car G | Gas EZGO | |||
| Share your engine size, speed, and tire size (electric guys too) | Members Rides | |||
| 2004 TXT 295 gas.Is it a MCI engine ? | Gas EZGO | |||
| 2004 ST 350 - Engine Siezed Up | Gas EZGO | |||
Linear Mode
