|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-20-2018, 04:19 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Location: NY
Posts: 72
|
Starter Adjustment - Cannot tighten
Hey Everyone.
1996 Tuff 1, but using the 295 engine. I need to tighten the starter belt, but the starter itself wont budge. I loosened the 3/4" nut, but it seems like its still fixed in place. Any tips for getting it to move? Im hesitant to do much hitting with a hammer for fear of messing things up internally... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-20-2018, 06:27 PM | #2 |
Not Yet Wild
Join Date: Nov 2017
Posts: 50
|
Re: Starter Adjustment - Cannot tighten
Any of them I have seen has three places to loosen, make sure you have everything loose
Sent from my SM-G950U using Tapatalk |
10-20-2018, 07:07 PM | #3 | |
Not Yet Wild
Join Date: Jul 2017
Location: NY
Posts: 72
|
Re: Starter Adjustment - Cannot tighten
Quote:
Any idea where the third point is? or if its just that bolt and I should put a bigger wrench on it? |
|
10-20-2018, 07:11 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: Starter Adjustment - Cannot tighten
Some have a bolt that goes all the way through. Others have a bolt on each side. Try loosening the bolt head you have left.
|
10-20-2018, 07:11 PM | #5 |
Not Yet Wild
Join Date: Nov 2017
Posts: 50
|
Re: Starter Adjustment - Cannot tighten
Mine has two bolts with nuts and the adjustment bolt. I would think if you had the long bolt loose and the adjustment bolt loose it should move
Sent from my SM-G950U using Tapatalk |
10-20-2018, 07:41 PM | #6 |
Not Yet Wild
Join Date: Jul 2017
Location: NY
Posts: 72
|
Re: Starter Adjustment - Cannot tighten
Thanks Guys.
Ill give a good wrenching on the bolt head thats left... Most things seem to be well rusted on my cart, so this isnt proving to be an exception. In the event I need to do some prying, any good spot to lever a pry bar in there, or a surface on the starter I can use that wont break something? |
10-21-2018, 05:16 PM | #7 |
Not Yet Wild
Join Date: Jul 2017
Location: NY
Posts: 72
|
Re: Starter Adjustment - Cannot tighten
Got it done finally.
It was a through bolt, and was just seized in place. I had to use a big pry bar after putting Kroil all over everywhere, and finally got it to move enough that the belt tensioned. hooray! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tips on Starter/Generator Adjustment? | Gas EZGO | |||
Tighten starter belt | Gas Club Car | |||
How do I tighten my starter/generator belt on my G2 | Gas Yamaha | |||
Starter switch adjustment | Gas Yamaha | |||
Tighten Starter/Gen belt - solo | Gas Club Car |